You're missing an essential point in this discussion. In order to fairly compare ANY two turntables you must use the same associated equipment with each. That means ALL components-tonearm, cartridge, phono stage, amp, speakers, stand, cables, etc., have to be identical. You must even use the listening room. Otherwise you are comparing apples to oranges. Any comparison done with different equipment in a different environment is meaningless. The most important link in the audio chain is the cartridge. That's where the signal originates. No amount of money spent on any components down the line can make-up for a flawed cartridge. Also, the quality of reproduced sound is so subjective as to be nearly impossible to qualify. We all have ideas of what sounds best to us and have psyco-acoustical prejudices. Really folks, forget the engineering and all the other stuff. You've just got to LISTEN to what you are thinking of buying and decide based on that. I would never spend thousands of dollars on ANY turntable without listening to it first with my own equipment. If a dealer or manufacturer is not willing to allow you to do this, I suggest you shop elsewhere. If anyone is interested, all else being equal, in my experience spring-suspended turntables almost always sound better than non-suspended ones.
Suspended Basis vs Nonsuspended Teres
Hi:
I am preparing to upgrade my TT and I am seriously considering a Top-of -the-Line Teres with Basis Vector Arm or Graham 2.2 and Shelter 901 combination. In researching the arm, I had some e-mail exchanges with AJ Conti from Basis.
It was kind of him to correspond with me and I am appreciative of his input. Of course, he endorses his own TT but he was very negative about others except SME. I have excerpted a couple sections to illustrate. Is he correct that nonsuspended tables are inferior unless you purchase a Vibraplane platform. And, do we believe that the Basis has 50 dB less environmental noise infiltration than other TT. My lack of hands-on experience with these TT and their strengths and weaknesses leave me wondering. I have no doubt about the quality of Basis TT but I am seeking input from several sources I trust. Audiogon is one.
see comments below.
"The 2001 with Vector is clearly superior to the SME 20 with any arm. The only turntables I would consider, if I were buying out on the market and knew all I know about all of them, would be Basis Debut series, 2500 series, 2001, SME 30, SME 20.
"Once you own the Vector, after you place it on something else, you will wish you bought Basis, especially after you see one, see the platter turn but have it look so stationary you don't think it's turning, such is its rotational accuracy, and they you note the platter on yours
going up and down as it rotates..........or after you realize that even the 2001 is TOTALLY isolated from all room vibrations, including its own motor, while any Teres, VPI, Nottingham have 50 DECIBELS MORE outside world garbage
getting in than the 2001. Yes, 50 decibels. ... That means NOISE, every unisolated turntable, including our own 1400 and 2000 (only offered to get in a lower price range where
all of the competition is unisolated) are full of noise, changing the tonality, losing and obscuring detail which you can never get back. It is pathetic and ridiculous to offer the $3k plus turntables that are offered without isolation, pretending cones and mulitple layers of actylic and other materials can "isolate" (proving the incompetance or dishonesty) of the designer or sales guy at the company. I love what Teres said to one of their dealers: "We can't
compete with the expertise, fixturing, tooling that Basis has, but here's why we are great-we listen to each one and throw away an entire unit if it does not sound good." What a great statement of "We don't know what we're doing, but
we try hard to not let poor product out the door."
I am preparing to upgrade my TT and I am seriously considering a Top-of -the-Line Teres with Basis Vector Arm or Graham 2.2 and Shelter 901 combination. In researching the arm, I had some e-mail exchanges with AJ Conti from Basis.
It was kind of him to correspond with me and I am appreciative of his input. Of course, he endorses his own TT but he was very negative about others except SME. I have excerpted a couple sections to illustrate. Is he correct that nonsuspended tables are inferior unless you purchase a Vibraplane platform. And, do we believe that the Basis has 50 dB less environmental noise infiltration than other TT. My lack of hands-on experience with these TT and their strengths and weaknesses leave me wondering. I have no doubt about the quality of Basis TT but I am seeking input from several sources I trust. Audiogon is one.
see comments below.
"The 2001 with Vector is clearly superior to the SME 20 with any arm. The only turntables I would consider, if I were buying out on the market and knew all I know about all of them, would be Basis Debut series, 2500 series, 2001, SME 30, SME 20.
"Once you own the Vector, after you place it on something else, you will wish you bought Basis, especially after you see one, see the platter turn but have it look so stationary you don't think it's turning, such is its rotational accuracy, and they you note the platter on yours
going up and down as it rotates..........or after you realize that even the 2001 is TOTALLY isolated from all room vibrations, including its own motor, while any Teres, VPI, Nottingham have 50 DECIBELS MORE outside world garbage
getting in than the 2001. Yes, 50 decibels. ... That means NOISE, every unisolated turntable, including our own 1400 and 2000 (only offered to get in a lower price range where
all of the competition is unisolated) are full of noise, changing the tonality, losing and obscuring detail which you can never get back. It is pathetic and ridiculous to offer the $3k plus turntables that are offered without isolation, pretending cones and mulitple layers of actylic and other materials can "isolate" (proving the incompetance or dishonesty) of the designer or sales guy at the company. I love what Teres said to one of their dealers: "We can't
compete with the expertise, fixturing, tooling that Basis has, but here's why we are great-we listen to each one and throw away an entire unit if it does not sound good." What a great statement of "We don't know what we're doing, but
we try hard to not let poor product out the door."
- ...
- 23 posts total
- 23 posts total