Best Tonearm Match for Shelter 901

Bwhite, Moerch is a good arm. It's not one that I would select personally for myself, but you could do alot worse. About the adjustment methods, all you have to do, is adjust it once, and you know how to do it. You just have to get on the bicycle and ride the damn thing!

Yes, I've known about the Cocobolo platter for about 6 months now. I haven't heard it, as I'm still trying to save up for the 255 platter. The word on the Teres forum is that it is better, but there is still some question about the long term stability of the wood, ie. it might shrink, move about, or change shape over time, and depending on conditions. From what I've heard, it is still an experimental thing, but there will be a few for sale, if you want one.

Whoops - I didn't realize (prior to posting) that Moerch is a unipivot design and would fall into the category of "not" being the best option for a low compliance cartridge like the Shelter. I think I'll look elsewhere...

Speaking of elsewhere, I'm also very interested in linear tracking arms (like the Eminent Technology) -- but there again, I have no clue how to set 'em up. :(

DO you have any thoughts on the linear tracking arms?

Brian, linear tracking arms that are of the kind of quality that you would need, are all air bearing types. They have alot of issues with leveling, keeping moisture out of the lines, and the noisy air pump, which usually has to be kept in another room, with the air lines running through the house to get to the pump. They have their strong points, but they are often times more of a pain in the ass than they are worth. If you want to play with pressure valves and gauges, and air lines and pumps, and moisture traps, and level the table every time you play, or risk breaking off your cantilever, then go for it. When they are right, a really good linear tracker can do the job as good as it can be done. They require constant attention.

There is a Moerch that is a dual-pivot. That's what I thought you were referring to. I still think the OL is better.

Eminent Tech. ET2 and ET 2.5 arms are excellent arms.
Yes, they are slightly more involved in setting up but you get rewarded with the result.
As long as you have near by closet or room, you can set the pump outside of the listening room(longer the air tube, better it is). Stock ET pumps are not that noisy either even if you need to keep the pump in the listening room.
Once they are set up, my set up did not need much maintenance unless I move the turntable. Cartridge changing is a breeze due to removable arm tube.
If you can set up your own cartridge, you can set up this arm. When you are looking for one, make sure they are either stock or just have Wisa/Surge tank upgrade. Don't purchase one if they have too many DIY modifications.

I have heard from others that the new Kuzma Reference cartridge is actually a shelter 901 with the Kuzma label. Kuzma must then feel that this cartridge is a match for their arms which have about 12-12.5gr mass.