newbie turntable/speed control question


Hi, I'm basically new to good audio (I've spent most of my life collecting software, and haven't paid much attention to hardware until lately).

I'm currently using a Thorens TD 125/II with the stock Thorens arm. I want to trade up--I loved the Michell Gyrodec SE I heard a while back--but also want to balance great sound with one feature that I hope won't be considered silly here: convenience. What I mean is that I want a two-speed turntable where I can change from 33 to 45 without lifting off a platter and adjusting the belt. I have a collection of over 1000 7"s, a good number of which are 33 rpm, and the idea of lifting off a platter to switch belts every 5 minutes (or the idea of arranging my listening by record speed) makes my Thorens seem a lot nicer than it sounds.

So I'm wondering if anyone can let me know which high-end turntables include a speed control switch? This is something that I almost never see mentioned in reviews (hopefully this omission isn't because most turntables don't have speed control switches these days!). I know the Regas don't, and the LP-12 Lingo does, but apart from that I'm at sea.

Any advice and/or thoughts appreciated. Thanks in advance.

P.S. I don't need any more convenience than this! I'm happy without a tonearm lift, auto shut-off, strobe, etc.
am_dial24fb
Check out what can be done by power line conditioners. For example, VPI's SDS operates by taking wall power and generating its own output sine wave, much as an amplifier creates music from wall current. The SDS allows the user to vary the frequency of its output power, not just for fine tuning turntable speed, but also with a switch that allows you to go from 33 rpm to 45 rpm. There are other power line conditioners for turntables, but I have only had personal experience with the SDS. Aside from the convenience, you might ultimately also want a power line conditioner because they are said to improve the sound.
All Teres models have 33 and 45 speeds. You just hold the button down for 5 seconds to select 45 on a Teres.
The Oracle Delphi for one. However there are a number of tables that have an exposed motor pully and you simply move the belt on the pully. You don't have to lift the platter to get convenience and the expense of such a player. Look at the Nottinghams for instance - that's what I'm doing.
I think what he means is: Is there an option to vary the speed on the table after selecting 33/45rpm?

I'm using the Kuzma Stabi and there is an option to fine tune the speed up/down in the power supply. The power supply has some dip switches allowing fine control which allows me to get it just right.