2. cables
  3. 1243564575

How to Attach Spade 10 AWG Solid Copper

I am working on DIY cable project. I am almost done, I just don't know how to attach the spades I purchased. I have spades that require crimping. I need to somehow attach a 10 AWG solid single copper conductor to the spade. Can someone suggest a cost effective tool for accomplishing this. I have never crimped a connection and I have had a hard time finding a resource to aid me in my project, any will be greatly appreciated. Thanks.
dfelkai
timrhu
2,779 posts
 
I purchased one of these criming tools a couple of years ago. It is very handy to have around as it works great.
After crimping I always solder the joint for strenght and durability.
Post removed 
reb1208
518 posts
 
First solder at high heat using the least amount of solder to make a perfect connection. Then you can crimp. Do not crimp first and then solder.
Post removed 
rodman99999
5,984 posts
 
I one crimps at all, it should be done first, to obtain the best/most metal to metal contact. Minimum solder between the actual conductors is preferable. Once soldered, a crimp is wasted effort. Obviously- solder is a conductor also, but none will be as good as the spade or cable's metal.
More to discover