XLR interconnects?

Hello,Ralph,I used Canare speaker wire and canare wire in balancd cables when I had my Atmasphere MP3 and S30 and stacked Quad 57.
The sound was good,I was happy, no reason to experiment.
Now I have other gear that needs balanced cables.
This time an Audio Aero Capitole cd direct into a pair of Red Dragon power amps into 15 inch Tannoys.
I was now running very thin 14 ft runs of solid core silver wire to my Tannoys,and I was using the very same run of Canare balanced IC.
Since I had excellent results using canare IC and Canare speaker wire I thought I would audition a run of IC from the same company as my speaker cables.
This time there was an improvement over the canare cables, so I bought the silver wired version.
I am at a loss to explain why there was a difference.
Is it because the wire is the same guage and material as the speaker?Synergy again?
Was the Clear Day solid silver not a good combination with the copper Canare?
Was it the difference in construction of the Xhadow XLR's on the clear day compared to the Neutrik's on the Canare?
I loved my time with the Quads and Atmasphere gear, one of my better systems.
I know it isnot the electronics that are masking cable differences.
A friend of mine has the servo powered Acoustat 4 speakers and an MP3(he liked mine so bought one and kept it).
He wired everything up with Cardas neutral ref. balanced.
Then he experimented with some nordost and eventually settled with Harmonic Tech magic two.He invited 5 of his audio friends to a cable shoot out.
The Cardas Neutral, Nordost ValHalla and Harmonic Tech magic two were auditoned,and we all got very sick of listening to the same Pat Barber track.
Several of us confirmed that the Harmonic balanced cables gave his system a more robust yet detailed sound.
The Nordost cost more but didn't work as well as the Harmonic but outperformed the Cardas.
Sorry Ralph,but that's 5 pair of ears that voted for the Harmonic cables, and we didn't know the price discrepencies.
No agendas other than what cable gave the best sound.
I should add that all cables were the same length and were factory terminated.
I don't think it was a case of mass dillusion.

Lacee, I agree. I suspect that your CD player does not support the balanced line standard, and so the cables are making a difference where they should not have.

RCA cables have a connection standard, but no termination standard. Balanced line has a connection standard, but also has a termination standard, which is 600 ohms. It is that low impedance which makes the difference. If your source has a high output impedance, it can't swamp the effects of the cable and so the cable artifact can be heard. That's not taking advantage of everything that balanced line has to offer.

In the past, you used our preamp, which supports that standard, and so a fairly inexpensive cable worked fine. So IMO your experience is spot-on.

I don't know if I could have sat through that much Pat Barber, regardless of the cables :)

I haven't played her since.

At that cable shootout, a Meridian G08 was the source into the Atmasphere MP3.

We all preferred the Harmonic.

The outcome of this was that my friend replaced a complete run of Cardas Neutral Ref with the Harmonic magic.

This is balanced xlr cables from his tone arm,from his Meridan,and balance xlr out to the servo amps(these were mod to accept balanced inputs when he got the MP3 pre amp).

It was a worthwhile expense.
His whole system has a more robust sound.
If his vinyl sound remained the same as with the Cardas, I would maybe agree with what you say, but it too benefitted from the wire upgrade.

Maybe the XLR's that Harmonic use are superior to what Cardas uses.
The Neutral Ref is not the top of the heap, whereas the Harmonic were at the time.
Perhaps not a fair comparison.

What I do find intersting is that the Atmasphere pre amp allowed the differences between cables to be heard.
I wouldn't want to own a pre amp or any electronics that did not.

Ralph I don't doubt your findings, but are they based on measurements alone?

Some of us hear dead people.

Hi Lacee, do I understand right that in your post above, the cable shootout was going on between the source and the preamp?

The preamp is designed to support the balanced standard, but its inputs are high impedance to make it easier to drive. The result is that sources that don't support the standard can still work with the preamp, but you will hear cable artifacts- this sounds to me like what you experienced.

In any event, if the cable is not terminated you can get into differences. I'm pointing this out because like I mentioned earlier, the balanced system exists for the sole reason of eliminating cable artifact. So if you are hearing artifact, the system is not being employed to its fullest extent.

Then I guess companies like Meridian had better get with the program.

Same goes with my Audio Aero Capitole that I run balanced out into the balanced in of my mono blocks.
I can distinguish cable differences, does that mean that the Audio Aero Capitole 24/192 or the Red Dragon or both are not up to industry standards when using their balanced connections?

I always thought that the concept of running balanced was to eliminate or lessen the effects of long runs of cables.
Regular rca interconnects can pick up noise and loose signal if they are longer than 20 feet.

I have great respect for Atmasphere and their products,but I'm having a hard time with the concept that a properly designed balanced system would eliminate the differences between xlr connected balanced cables.
Is Atmasphere the only company that can claim this?
Is everybody else wrong?

There are just so many variables in cable materials, construction and in the quality of XLR's and how they are terminated to the wires,that makes me wonder just how can these things differences be eliminated?

Perhaps a trip to the local Atmasphere dealer and some cable swapping would be a lesson learned one way or the other.