Power Cord Burn-In


I know, I know...this has been posted before but I swear I searched the archives and couldn't find what I was looking for so here's my question:
Just purchased a new pc for my cdp.
Can I burn this cord in without turning up the volume( family factor) and can I leave my preamp and amp off during this process. In other words, can I simply throw a disc in my cdp and press play/repeat and let the music play with no volume?
Thanks!
greh
Yes, it will burn it whether you hear the CD or not.

But, a better idea:
If your amp or preamp uses the same pc connector, it will burn in a lot faster plugged into them. Most cdp's draw very little current, while the other units will draw much more and thusly burn you pc in faster. (My cdp draws only about 35 watts, while my preamp draws 140 watts, and my amps at idle draw over 300 watts and playing loudly can draw thousands.)

Richard
Just turn on your cdp.Current will pass thru your power transformer for the cdp power supply.Your not burnning in an interconnect.
Yes. You don't even have to play the disc if your cdp is on. My experience has been that power cords do not need as much break in time as ICs and speaker cables. Of course running your cdp, with a disc will pull a tad more current from the wall then, just, leaving the cdp on. That's, thinking about it, the better way to break in that pc. peace, warren