has anyone had any problems w/ Jasmine phono LP2.0

Hello I received my jasmine from China broken. sent it back got a replacement plus the silver ambilical for free to cover my shipping and hassle the new one has worked perfectly with very good results.
Now I am considering changing out the coupling caps.
NOT TO HIGH JACK THE THREAD BUT
This debate kinda sounds like years back when some folks said all amps sound alike its just a matter of how much THD is in the amp.
well we most all now believe different amps sound different why? parts maybe? hello? what is an SE version of the same amp? better parts. thats why it cost more and sounds a little better
just spend some time on the web reading all the cap comparisons, and even on the jasmine threads here on Agon to realize coupling caps make a difference.

I could go on but i think I have made my point.

Rockinrony, 'I could go on but I think I have made my point.' Really? 'Better parts' imply comparison between at least some of them. You should first try and compare, say, 10 different caps and than make your 'point'. Otherwise the 'point' must be made by someone else who actually made some comparison such that you can copy his 'point'
regarding the question which of the compared caps is 'better' than the other. You may have 'a point' with such a strategy but such 'point' is not considered as 'the point'. The 'technical part' in the vocabulary of the amateurs is 'cheap caps' versus 'expensive caps'. 10 x 2 expensive caps = ý. It may than be the case that one is 'better' off with an (much
more) expensive pre with 'better parts' already soldered in by the electronic engineer who designed the pre.
I myself am from the other 'school'. The 'wire school'. Those wire in the Jasmine are not to my liking. They look cheap to me and are very thin.My 'point' is to substitute
those with very expensive 99,999 silver wire. The added 'point' is that all my interconnects, phono-cable included, are also 'pure silver' kind. This way my 'treasure' will become the real treasury.

Regards,

Nandric thanks for making my point you are correct better wire makes a difference its just another link in the chain

Things were not rosy after purchasing mine April, 2012.

I had used the unit for about 3 weeks before the right channel faded out. After much Skypeing with "Katherine" from Salience-HIFI-Audio in Shenzhen, they sent me a main board for the phono box, which I installed. After repairing, I have not had a problem. I leave it on 24/7.

I used several caps from the old board to beef up the new one. I replaced all the small wires with fine teflon-covered solid copper and the input wiring I replaced with cloth insulated solid silver. The output caps I trialed with Russian K40Y paper-in-oil and felt it was too suave and lacking detail but addictive. Between those and the OEM Solens, I most like the Robert Hovland SuperCaps. Neutral, revealing, 3D, transparent and very engaging. The goal was to further open up the top octave to balance the enhanced bass from Nichicon KA audio caps I added to the power supply. What a nice change in dynamics and bass presence the Nichicons provide.

As a side note, Jasmine already installed PP snubber caps on the power supply rectifier diodes. I also replaced the umbilical with Jasmine's upgrade cord. Other upgrades are planned.

Biggest drivers of change? 1.) phono box coupling caps followed by 2.) KA caps in the power supply. The wiring upgrade is definitely discernible but not as quickly noted.

I just bought the new version of the Jasmine, the 2.5du. There's this hum coming from the power supply that's quite annoying. I can hear it 7 feet away. In conjunction with the transformer hum I get from my amp, I have a veritable hum cacophony emanating from my rack. It doesn't come though the speakers, mercifully, but I'm wondering if this is common for these Jasmine units.