Anybody have the Feickert Adjust + program?

I do have the Adjust Pro +. I am in NYC. I ordered in January and got it early April!

But aside from this frustration, it is a great program. The azimuth test on my arm is a bit difficult as the "level" method does not work. The arm is a VPI 10.5i which is a unipivot arm. The level method worked great on my Thorens which has a headshell that can rotate. I can place the level on the headshell to take settings.

The other issue I have is the accuracy of the 3150 hz tone on the LP. I believe it is not exactly 3150 so setting your speed to this frequency can cause errors. I believe it is off by about 16 hz.

Gene

Gary many thanks for the info you provided. I had a feeling you were going to let us know how important azimuth set correctly relates to superior playback. I tried again today with a test tone and meter again a waste of time.
Thanks again
Mike

Feickert leaves a lot to be desired,
can't really get more than spindle to pivot point set

try custom mint lp protractor to get precise alignment
do a search here for much detail

Gene,

It's been a while since I've used Adjust + but I had checked the speed settings against a couple other records and the KAB strobe. I do not recall the difference you noted. I would have most certainly brought this up with the manufacturer at RMAF last year. Of course, I don't have your record. One thing that WILL through the reading off is the CPU processing delay associated with delayed readings from the A/D card you are using. One way to double check this is to lower the bit rate and the FFT sample size. If you suddenly see the correct speed, the CPU may not be fast enough to use the maximum resolution the program is capable of. I hope his helps.

Audiotomb,

The Adjust + Software is different from the alignment protractor you are speaking of. It's feature sets are different.

I don't want this to venture off topic but I will state that I have been able to get excellent results with either method (Arc or Feickert tool). In fact, I have used the Wally tool to verify my Feickert alignments (not the other way around for those noting this). Patience is needed for both tools and a clear understanding of how to use them. I may also add that both alignment tools are useless if you don't get Pivot to spindle distance correct. For those with fixed (non-moving) armboards, this is extremely critical. Experience tells me that I would suggest that one always double check the Pivot-to-spindle distance before ordering an arc style protractor.

Dre

Audiotomb, I am with you. I use the Feickert protractor and the mintlp protractor. The Feickert does a great job on the tone arm spindle to pivot setting and then the mintlp is great at tweeking the overhang to get the over all setting right on.

The software is very interesting?
Terry