Technics SL1200/1210 owners - which mat?


I've upgraded to the Boston Audio mat, it's quite a big improvement over the stock rubber mat. I thought the stock rubber mat sounded very loose and ripe in the bass. The mids and highs were drowned out by the loose bass. Maybe this is the 'dark' sound people are referring to when listening to the Technics?

The Boston Audio Design Mat1 brings the sound together, firming up the bass, and bringing it in line with the mids and highs. Far more cohesive presentation.

What other mats have you tried and are using?
128x128Ag insider logo xs@2xjames1969
It's out of production, but I found a used Oracle Groove Isolator for $10. It's sorbothane, but unlike the current $99 Audioquest mat, it's not sorbothane *gel*, so it's not sticky and doesn't overdamp the music. It seems to weigh about as much as the Technics 17 oz. "Supermat."

Recently I tried adding the Technics felt slipmat underneath the Groove Isolator and I like that even better.

Flicking the platter with my fingernails before and after, the felt/sorbo mat stack dampens the ringing out of the platter more than the sorbo mat by itself, and I noticed a small improvement in liveliness and clarity when playing LPs after I made that change.

I think finding the optimum mat for the Technics is more of a challenge than for the MDF/glass/acrylic-plattered belt drive turntables, because their platters are already pretty inert, and the mats for those turntables only have to drain the LP of resonances and isolate it from noise from below.

The SL12x0 platter, however, literally rings like a bell, so the mat has to kill that ringing as much as possible while doing all the other things that mats do. I think that's why you'll often find multi-layered mat approaches to the Technics.

I've certainly found that putting the felt slipmat on first, with a heavy mat on top, kills the ringing the best of anything I've tried yet. However, I haven't tried a Herbie's (which is dual composition), Iron Audio, or Funk Achromat, all of which have gotten thumbs-ups from various SL12x0 owners.
05-11-08: Zenblaster
I am going to try some different mats and see the difference, I'll try flipping the stock KAB mat also.
Try flipping it and putting the felt mat underneath as well.
Sound Deadened Steel (SDS) video clips.

http://www.sounddeadsteel.com/videos.asp

Check out the vibration clip. :-)
I'm using SDS Isoplat Mat with cork backing.
The biggest sonic improvement though, has been realized
after replacing stock feet with Starsound Technologies
Audiopoints. I can't emphasize strongly enough a degree of improvement, especially in the bass definition.
It all will depend on the flooring and the rack construction, but in my case (concrete floor and Mapleshade
Samson DIY clone)direct coupling is the way to go.
SDS isoplatmat sitting between 2 layers of Herbie's Way Excellent II mats. Also isonoe feet with sorbothane boots to complete the picture.