Lubrication for VPI tables

I did this on my scout before I upgraded to the Scoutmaster. Why, any concerns?

well, i was just wondering the specifics, like how much grease to put on the bearing, and if you just put the grease on the very top ball bearing, and then how much oil you used to lubricate the motor, just stuff like that, to make sure i'm doing it right.

i used the white lithium grease as recommended. i put about a pea sized drop on my finger and then touched it to the top of the spindle ball bearing. i'm glad i did this too, did not appear to be too much grease remaining.

on the motor i put the same oil i use on my car, castrol syntec. found a old quart, squeezed a drop or two out then layed the motor on its side and put two drops on the shaft just below the belt pulley.