Miracord 50H Turntable


My dad had a Miracord 50H turntable. Unfortunetly, he recently passed away and the turntable has been offered to me. I know little about it in regards to quality and recommendations as to what cartridges might be a good match. I have been looking to get a turntable and thought this would be useful for the time being. My pre-amp is an Audible Illusions Modulus 3A. The amp is McCormack DNA-1 Deluxe with a Revision A Gold uprade and my speakers are Thiel 3.6's. Any help out there? Thanks.
kleiman421
It is a low end table but there are worse ones out there. It could be a good start to get into vinyl. The problem with the low end tables is that they have loose bearings and don't retrieve the information as well as they should and the cartridge isn't held in the perfect relationship to the groove like it should be. This results in mistracking and heavier wear to the records. If you wish to continue in vinyl, then you should upgrade ASAP in order to save your record collection from the high frequency "lathing" that occurs with the low end turntable systems. At the level of the Miracord, it is questionable whether it will sound any better than CD.IMHO.
Have to disagree with the above response. Assuming the table is in good condition, the only thing you'll be giving up to higher priced tables is rumble and the ability to track some of the higher end cartridges. Like any other table it's finding the right combination of arm ,cartridge, & deck.

I've spent about a year collecting & refurbishing old Elac, BSR, and Dual tables and I'm constantly astonished at how good they can sound when properly set up.

For the higher mass Elac arms a lower compliance cartridge is generally the rule. The Grado Prestige series are particularly good matches for the Elac 50, 750 & 770 series tables. I suggest the Blue or the Red for the 50H. You should also replace the interconnects with a modern, high quality, low capacitance pair. The overhang gage on the table is quite accurate and some of the headshells even have a VTA adjustment. The resulting sound is DEFINATELY high end and will shame any CD player under $500. Plus it's way retro-cool. My system is extremely revealing (Apogee Studio Grands, Mod Squad Phono Drive, & Reference Line Electronics)and I hear no signs of mistracking on my 50H, 750MKII, or 50HII when I have taken the time to set the table up like any other high end table.

You can get the table rebuilt to pratically brand new condition at theturntablefactory.com. Cost, minus shipping would be ~$100. The Grado Blue can be had $65 or so. Astonishing value IHMO.

If you are going to pass on the 50H, let me know and I'll find a home for it.
Are you guys trying to say that not only do TT's sound different from one another, but that they can sound better than CD's ??? Perish the thought.... : ) Sean
>
Relax Sean, it's just Twl going nostalgic on us :^) Just watch, he'll start talking about thermionic tubes next..!