Fidelium speaker cabke

COSMETIC, thank you

D.I.Y = Suggestion - - - make these yourself. No tools required - (approximate quantities for 1 PR. 10' cables)

16 pcs - 4" x 4" x2" (square bowl blanks - different woods available)      Approximate $192.00

16 (2 pak) SORBOTHANE  (ISOLATE IT) #0532550-30 - 2.5" DIA X ,5" TK.

BUILD = SHOULD YIELS 8 ASSEMBLIES PER CABLE.

STACK - (!) wood block - Center and press attach (1) SORBOTHANE DISC on the wood block - Center and press in place (1 assembly / foot of cable)

FINISH BY CENTERING AN ADDITIONAL SORBOTHANE DISC over the previous block/disc/ cable to complete an assembly. REPEAT EACH FOOT OF CABLE THAT WOULD OTHERWISE LIE ON A FLOOR SURFACE. 

To be verified = Approximate total cost = $592,00

Slightly pricy but will not only look nice (depending upon wood selected) but will do an outstanding job of cable isolation. (Easy to move and re-locate if desired)

O-O-O-PS!! I forgot one important thing - - - Each build I have designated pertains to one single channel, in as much as the cables in question are single conductor and require a pair (+ and -) per channel. Therefore, the total system cost would be in the neighborhood of 4x the previously stated cost.  Yes again, costly, however considering the class these cables are ranked in, the additional outlay shouldn't be a limiting factor.

NOTE: I have one suggestion that I have yet to try that would help reduce the total cost and look less cluttered - - - - Try "stacking the (+) and (-) cable using one or more additional SORBOTHANE discs. (A thought for experimentation.) From one point of view, the finished assemblies would look very professional, If done with care and precision.