Something very basic like this would work for you. The tape player goes into the jacks and then the USB end into the computer. This is just USB-A at the end and if your computer only has USB-C you will need a converter for that as well but they are readily available. I have done a lot of cassettes of spoken word as well as reel-to-reel of the same type of thing, for family and others, and these types of devices work perfectly fine.
https://www.walmart.com/ip/USB-Analog-To-Digital-Audio-Converter-Recorder-Support-MP3-WMA-WAV-OGG-Format/879548110
How Do You Convert Cassettes?
I have a variety of old cassettes that include family interviews, live shows and long out of print music. I would like to convert these over to a digital format. How do you do that?
I used to have a PC that had RCA Audio jacks in the back, but that computer died. I’m looking at new PCs these days, and the stock computers do not come with RCA inputs, unless you get a special order one.
What methods have you all used?
Thanks in Advance.
- ...
- 11 posts total
Also, Amazon has things like this device which are a new cassette player with USB output. Dirt cheap at under $40. |
Hello pgaulke60. Most desktop computers have mini phone plug audio inputs on their sound cards. If you have lots of cassettes to process, serious, dedicated sound cards are avilable that are worth the time and $$. If possible use the same machine that made the original tapes to play them. Clean the heads. Use an adapter (female RCA to male mini phone plug) to couple your cassette player to the computer's audio input. Be sure to use Dolby if the tape was originally recorded using that system. I use WavePad software. They have the best noise removing software I have experienced. Record the audio at the highest level that des not cause clipping. Hopefully, you recorded 10 seconds or so of blank tape (not the non magnetic leader) at the beginning or end of what you want to digitize. If not use the space between songs near the middle of the tape. Do this for each side of the cassette.You will use that blank sound to remove tape hiss, and residual noise from the player, from the ultimate recording you will save. If the recording does not have its peaks levels at 0db, use the "Normalize" function to bring up the recorded level. Now, find that section of "blank tape" sound and select eight seconds of it in the "select sample" part of the Noise Reduction part of the Effects/professional effects menu. Then select the "apply . . ." choice to subtract all the player hum/noise, and tape hiss from the recording. The result will suprise you. I've been doing this for 20+ years and promise you the results are worth the bother. But you do need a desktop machine and some time to invest in saving your music. If you are in southern California, look me up and I'll demonstrate the process using your cassettes. Save the resulting, processed recording as whatever audio format you prefer. This process also works well for open rell tape. Enjoy the results. |
The most modern way is to store them as computer files, as most everyone has indicated. However, if you prefer to retain physical media, you can also convert them to CDs. There are decks like the HHB CDR-830 which operate much like old cassette decks, but record to CD-Rs. They have the same style level controls that you set by eye. |
- 11 posts total