Bi-wiring and Bi-amping for Dummies (Well, One dummy amyways)

So it's time to talk about break in time.many wire manufactures say it takes > 100 hours to break in wire.amplifiers take > 50 hours and sound better up to 500 hours. Speakers are the same. Don't be disappointed if it doesn't sound quite correct in the beginning.that is why most manufa tures have at least 1 month return policy to give time for breakin.some audiophile don't believe in this as each to his own. Enjoy the music and experiments

@mark200mph Wrote:

Got cell service again and was able to watch the video. Its paul! He is a very smart manufacture 

The video in my post above mentioned by @toddsyr, is not Paul McGowan of PS Audio! 😎

Mike

It was Kelly link that was paul.

@mark200mph It's great that you point these things for the benefit of everyone who might read things here. I do firmly believe in break in time. Morrow Audio is giving my new speaker cables 40 days on the burn in machine. I do realize the new components will need a little time too. I'll run the new amps, preamp and everything for a bit before even really listening to them. A few hours anyways. Then I'll relax and start enjoying things knowing it's only going to get better. I figure it's best to do a lot of break in before trying room treatments. 

@parkergetdean If you're speaking about me, take it however you want to. Being nice and polite is passive aggressive? Whatever. 

Snake oil? Those who hear a difference would disagree. BTW, I have never Bi-Wired!

Pros of Bi-Wiring

• Reduced Interference and Crosstalk: By separating the signal paths, the bass currents are less likely to interfere with the treble signals, potentially resulting in cleaner highs and more precise sound reproduction. 

   

  2

• Improved Soundstage and Imaging: Some audiophiles report a wider “sweet spot” and better instrument separation, making the listening experience more immersive. 

   

  2

• Enhanced Driver Control: Each driver receives a more focused signal, which can improve clarity and dynamic response, especially in high-quality speaker systems. 

   

  1

• Potential Efficiency Gains: Bi-wiring can slightly reduce impedance and allow the amplifier to deliver power more effectively to each driver. 

   

  1

• 

  

  3 Sources

Cons of Bi-Wiring

• Minimal Audible Difference: Many experts argue that the improvements are subtle and may not be noticeable to the average listener, especially with modern speakers that already have effective internal crossovers. 

   

  3

• Increased Cost and Complexity: Bi-wiring requires additional cables, which can increase setup costs and create more cable clutter behind the system. 

   

  2

• Compatibility Limitations: Not all speakers support bi-wiring, and some may not show any improvement even if bi-wired. 

   

  2

• Potential for Diminishing Returns: Using two lower-quality cables may be less effective than a single high-quality cable, and the benefits may be outweighed by other factors like room acoustics, speaker placement, and amplifier quality. 

   

  2

• 

  

  4 Sources

Practical Considerations

• Bi-wiring is most likely to benefit high-end speakers in well-optimized listening environments. 

   

  2

• For casual listeners or systems with standard speakers, single high-quality cables may provide better overall results than bi-wiring with mediocre cables. 

   

  2

• Experimenting with both setups and listening critically is recommended to determine if bi-wiring produces a noticeable improvement for your specific system. 

   

  2

  
  In summary, bi-wiring can enhance clarity, separation, and soundstage in certain setups, but the audible benefits are often subtle and subjective. The decision to bi-wire should consider speaker compatibility, cable quality, room acoustics, and personal listening preferences.

• 

  

  4 Sources