I used LAT International cables for years too. For something comparable, I recommend Wywires... basic level is enough. For balanced cable (XLR), I use all Blue Jeans, and you have can have custom lengths made. According to some folks, balanced connections don't benefit from different designs. Signal Cable is good for subwoofer cable like REL Speakon and their also a good source for Power Cords. Hope that helps. Good luck and Happy Listening!
- ...
- 20 posts total
@jjss49 I’ve been using Kimber Carbon phono cables and XLRs. There’s no raspiness or sizzle. They are neutral and have awesome bass. I’ve run then on phono stage and on DAC. Incredible cables. Compared to my Nordost Tyr 2 the Carbons are fuller sounding but lack just a bit of air on top that the more expensive Nordost gives you on vocals. No harshness though, no sizzle. Neutral cables - if you heard sizzle with them it’s most likely your components and not the cables. |
@ctlesq I have BJCs in rca and xlr. No they’re not comparable with Kimber. They’re ok until you hear something better. |
XLR We don't need the extra shielding of XLR for our short runs in Home Systems, however some/most XLR connectors LOCK in place and some, not all XLR outputs have a stronger signal (+3db) than RCA. RCA 1. Audio Classics changed my vintage jacks to all new Gold Plated RCA jacks 2. I bought or changed all my RCA connectors to LOCKING type, so when I mess with any cable I do not even slightly disturb any other cable's connection. IF ordering a custom length, you might ask the maker if they have a locking connector option. I bought something like these and changed some of mine https://www.parts-express.com/Locking-RCA-Plug-Solder-Type-2-Pair-091-1270?quantity=1 these come various lengths And, I found a 3 wire video composite cable with locking connectors, bought two, pulled them apart, and ended up with 3 pairs, color coded locking connectors.
|
- 20 posts total