Another "kinda-newbie" head scratcher

No matter what Phonostage I use, no matter which cartridge or cables

so the only constant is your amp?

Amps are not the usual culprits because they operate on a high level audio signal and don’t add much gain as a rule, but yeah, a reasonable thought.

@parkergetdean ​​​​​​

@lewm

But analog cables from my dac to pre should exhibit same behavior if it's the pre or aamp. Right, I've switched cables all around different inputs, different cables. It's only the phonostage. And the turntable is off. Still noise. It must be rf. Or emi. I'm going to try the Waxwing optical into my dac. 

@larryi Larry, so when using the Waxwing DSP phonostage via optical, it's perfect eywith a 200 ohm load. But as soon as I go to 47kohms,it makes the noise Even through digital! So you may be on to something there. The messed up part about that though is I've set all the other photo stages the analog solid state ones to either 100 ohms or 200 ohms and they make the same sound as the waxwing 47Kohms. 

This problem can be vexing- lots of potential contributors to it. When I experienced it recently, due to a high power transmission tower nearby, lifting the ground from the entire system solved it. Worth trying, as it’s the simplest solution of all possibilities.