1. Home
  2. cables
  3. 196013-200780

Diving into Power... Cable recs for my system and ears....?

Hello All,

 

I have been enjoying a full system upgrade over the past year... the interconnects and digital cables were an eye opener! Now I am bringing my attention to power...

I am currently running my components off a power strip that is 10' long... supposedly designed for audio. All my major components are plugged into this. This power strip is plugged into a wall outlet, which is shared with some lights etc. Also plugged into this power strip is my wifi router. 

 

I have a few questions:

-What is the most important in regards to impact to overall sound if I were to upgrade the power cords? My guess its: 1: Amp.... 2: DAC... 3: Streamer... is that right? Or is it the opposite? 

-Should I have an electrician setup a dedicated outlet to my electrical box, and run my main components off that? Is this worth it? or is there another setup between my electrical box and my components? Or if there is no detectible buzz, should I simply not bother?

-If I should begin looking into power cords as the first upgrade here, what cord would you recommend if I yearn for the following: Extreme startling presence and separation... magic midrange, highs blissful, voice acoustic jazz violin, piano... essentially startling presence as if the instrument is right there... 

I have been enjoying Anticables, and they have a well rated cable in the $300 range which supposedly is as good or better than $1000 cables... but I am open to recommendations...! 

 

Thank you all!

Richard

 

 

 

 

Currently my system (also outlined in my virtual system profile) is as follows:

    • SPEAKERS: Pure Audio Project Duet 15 Horn (Mundorf Silver Gold Oil Cap upgrade and customized crossover w/high pass filter and sweeter meds), Anticable 4.2 Flex Internal wire)
    • STREAMER: Nagra Streamer (Cardas Clear Coaxial)
    • DAC: HoloAudio Spring 2 Level 3 Kitsune edition (Silversmith Fidelium RCA Interconnects)
    • AMP: PrimaLuna Dialogue Premium HP Integrated (RAY TUBES EL34 Reserve power tubes, RADIOTECHNIQUE NOS 12AU7 Gain tubes w/Mullard NOS and Brimar NOS tubes (Anticables 4.2 Flex to speaker)
    • PHONO: Music Hall MMF-9 and McIntosh MP 100 Preamp (Audio-Technica AT160ML MM Cartridge, Anticable 7.3 and Silversmith fidelium Interconnects)
whyrichard
coppy777's avatar
coppy777
223 posts
 

cleeds... Well said.  Don't think the man actually has ears. 

Maybe, due to his belief in "science" he ignores the differences.  Likely though has never actually tried these products in his own system since he's been told they make no difference.  

karlss0n's avatar
karlss0n
14 posts
 

+1 @jasonbourne71   Hang in there Jason.   When a reputable manufacturer of high-end equipment recommends using their stock PC, that is good enough for me.

amtprod's avatar
amtprod
140 posts
 

Some good information and advice here, including from Jason, whom I think is trying to help folks from wasting their hard earned money on something that maybe psychosomatic. 

With most of your pieces on 'one line', having true dedicated circuits/extra circuits would be best I would imagine.  Otherwise, it may be better to have a sort of 'power base'.
I wish I could credit the member who had recommended power regulation units, but I have a Furman unit for my small system: amp, dac, CD player, Mac Mini (most all older units refurbished).  My next door neighbor is a fabricator, and when he would use his welder or plasma cutter or grinders, I would hear it in the stereo, and other times lights and power would dim/surge.  So I got a 'voltage regulated' unit, that also has some active AC filtering.  I can't testify that the audio gear sounded any different, maybe a little, but the greater audible benefit was stable, consistent regulated and filtered power and no induction noise!!

https://furmanpower.com/products/p-1800-pfr 
 

mclinnguy's avatar
mclinnguy
1,082 posts
 

@karlss0n 

If you are talking about Luxman, like many Japanese audio companies they do put great effort in using quality cables. I guarantee their stock power cord is not your average throwaway $5 power cord that many include in the box. 

Do you use Luxman’s speaker cables and interconnects? 

https://www.luxman.com/product/detail.php?id=30

karlss0n's avatar
karlss0n
14 posts
 

I use Luxman's stock power cord, and Benchmark Audio interconnects and speaker cables.  Benchmark's reputation for solid equipment and sound performance suggests the cabling they sell and use will match their equipment.  If you looked at my system you see I have am Auralic DAC and Verity Audio speakers, both companies have recently closed shop.  So it would be fair to question my judgement :-)

More to discover