Trans-Fi Terminator Tonearm: 2019 Update

The best sounding wire I ever had, was the original pure Silver wire that Vic used to supply with the Terminator. Unfortunately his supply dried up and its no longer available, I've searched myself. This was, in my opinion, a little to stiff/heavy, but when you got the dressing right, sounded phenomenal.
The varnish layer on the Copper Litz just makes it to stiff for me. My current 36AWG Silver plated Copper is very, very light and flexible. The PTFE coating is very thin and soft, so the wire is free to move and offers minimal resistance.
If I could find something similar in pure Silver I would use that.
Andrey seems to coil the bundle of wires like a spring, to me, this is not a good method. The fact that the Litz wire will stay in that form and not relax confirms my thoughts on it.

Well I replaced my pump with something quieter.
It's the HYGGER HG095 4W version.
This gives 95GPH/360LPH at 0.02 Mpa pressure.
So slightly larger flow and slightly more pressure, than what came with the Terminator, but not by much.
Sound level is <35dB, which is noticeably better.

Fed the twin outlets, individually into a 5L tank with 4L of Polystyrene balls in it (4 to 6mm diameter). 

I wrapped the pump in 10mm acoustic foam insulation, which lowered the noise further, but only by a small amount. The combination of new pump, twin smoothing tank inputs and Polystyrene balls has definitely improved the air supply.
More importantly, my set up sounds better, smoother, more detailed.
Even the wife commented, saying it sounded better, not knowing what I had done.

@qwin 

Thanks for the comments on dressing my wires. I see your point, and I’m doing some modifications. The infamous silver wires the Vic initially supplied was discussed in earlier posts, unobtainium though. 
 

The Hygger pump looks really nice, like an Apple TV box. The next pimp I used after the original was an Enhiem 400, 400 LPH,  very similar to the Hygger. You should be good if you decide to add another 10-20 L tank to improve things further. 

Vic used to buy the Silver screened wire from HiFi Collective (HFC) here in the UK. They still have it on their website, marked as discontinued! I came across it recently when I was researching what wire I could use.
I had a tidy up, went through some of my boxes of Turntable/Cartridge bits and bobs. I found some of the original balanced Silver/Silver screen leads that Vic made up for me 10 years ago and a pair of RCA using the same, so I have x4 strands 800mm long and x2 strands 600mm long.
I’m tempted to make a new harness for the Terminator. I would use just two strands, the core for the +Signal and the screen for -Ground on each lead from the cartridge. I had a go at stripping and separating the core/screen on some of the Silver wire last night, it’s mighty fine and tricky work, but I can do it.
Mmnn.... I will sit on the thought for now as my deck is sounding so good, but its an itch I think I will have to scratch along the way.
I have my pump and tank on the top shelf of a corner cupboard, where I keep my bottles of whisky, the only way I could fit an additional tank, would be to lose the whisky? That’s a hard decision .

@qwin What cartridge are you using? What have you used in the past?