Subwoofers - Final Thoughts with Martin Logan ESL 13A


I’ve narrowed this down to 3 choices (I think) and was looking to see if anyone has had some experience with pairing these subs with ML ESLs? I can’t try and return because they are mostly secondhand purchases, so hoping to get it right the first time!

Force Cancelling subs have been highly recommended, so:

KEF KC92 (or KF92 older model) 2, 3 or possible 4 of these:

https://assets.kef.com/product-support/kc92-subwoofer/KC92_info_sheet_EN_V4_20240124.pdf

Martin Logan BalancedForced 210 - Maybe the best as they match up nicely, but I could probably only do one of these as they are HUGE. I have only one spot I could put one as far as the manual's recommendation goes. Martin Logan says these will cover 3000 sq. ft. My room is only 500 sq. ft. Two maybe overkill, but some say, "2 subs or no subs" Maybe I could put another addition on the house :-( 

https://www.martinlogan.com/en/product/balancedforce-210 - click on Specs/Lit

Lastly, The Swarm Subwoofer System - not sure how well this would work with my ESLs.

https://www.audiokinesis.com/the-swarm-subwoofer-system-1.html

Any advice would greatly be appreciated (as usual).

Thanks, and all the best of the season to you all!

 

 

 

navyachts

@ozzy OK, sorry for my ignorance. Once I figure out what a test signal is and download it, what do I do with it? Do I need a microphone, computer software, etc?

Then, how do you relate this signal from the mains to that of the subwoofer?

Is there a link somewhere on how to do what you are suggesting? Thank you

 

 

 

Post removed 
Post removed 

FYI, my subs are set at 70hz.  Perhaps start at one end and move to the other to find what suits your ears best.