USB DACs with 24/192 via USB


Are there any "audiophile" quality DACs that can receive a 24/192 input via USB?
bigamp
REstock

Thanks for the links... and I do dig where you seem to be coming from. The info from this link says some of what I alluded to early on in my diatribe on alternative methods, when I mentioned the JA article in Stereophile wherein he points to the M Audio transit, (?) and this self same EMU 404, I also briefly noted above.

That links poster also confirms my convictions about the aspects of having to write the driver, and support it thereafter.... I know that takes some doing and resources most high end DAC makers aren't looking forward to doing, if they do them at all.

Again, I absolutely am confined to look towards the most practical, high value paths first and foremost.

With respect to all, once you start digging in the 'mine of diminishing returns', you're going to wear out a bunch of shovels for just a bit or perhaps better gold.... if then.

the sole attraction for me in the 192KHz arena is IF I can capture stereo or multi ch audio onto a hard drive from ripping it off the disc itself and thereby have the ability to archive, select, and play it back from there.

Thereafter for me, is the choice of which interface, which or how many steps in the conversion process, and their accumulative cost to performance ratio.

Naturally, and as well, its' comensurate level with that of my current stereo's abilities. As is usual for me regardless the component to be added next. Such is just my lot.

Having heard some high res played back, I've got to ponder the expense for such a result, or a change.

Do check out the computer audiophile website too for more insights and methods.
Bigamp
Are there any "audiophile" quality DACs that can receive a 24/192 input via USB?
It appears that the PS Audio Digital Link III has an internal native mode of 24/192KHz. It also has a USB input. As to whether it can actually receive 24/192 over the USB link, I don't know, but if it gets a 16/96 or 24/96, it's going to upconvert it to 24/196.
I may repeat some of what has been said:
-there are various USB Dacs that go all the way to 192 but I believe most stop at 96 for now
-firewire may generally produce better results, primarily used through Weiss equipment
-all high end manufacturers I spoke to assert that for very best performance you still need to have the interface be outside the DAC. Use a computer card or other interface
-so for best quality, run a firewire into a Weiss AFL1 or maybe a usb into other device. You can then run single or double XLRs into DACs such as the Scarlatti, Weiss Medea/DAC1, Accuphase DC801 etc and have the best possible sound you can get these days. I have not tried wavelength or the Wadia 9.

You can download from HDTracks, Linn, HDTT, BSO's site, etc. But get ready for some quality time with your computer as most of these sites are amazingly bad at bundling the metadata, so you will have to move things around manually at times. I assume at some point they will get it right, get cheaper and we ll hear most master recordings such as Reference Recordings online.

Of course, all this is only to get us closer to vinyl!
07-29-09: Kops
upconversion is wrong way.....native is needed
I get the impression that the PS Audio DAC III is 24/192 in native mode. It upconverts lower sampling rates and shorter word lengths to 24/192. Therefore, I presume that if it receives a 24/192 digital bitstream, it will decode it in native mode as there's nothing to upsample.

BTW, the $299 Musical Fidelity V-DAC also runs internally at 24/192 and has a USB input.