What is the Current Guidance on Stereo and AV Configurations

using an integrated that doesn’t have HT bypass is far from a "simple" inconvenience. It means that whenever you adjust the volume level of the MC receiver, you also have to manually match the level of the integrated. Without HT bypass, the two go out of sync every time you change either one.

@cundare2 Uh, yeah it really is very simple unless you don’t understand it, which you apparently do not because what you described is not at all what happens without a HT bypass unless it’s not set up properly from the outset. It is very simple, and I know because I did it this way for a year without a HT bypass before I got a dedicated listening room.

@soix Respectfully disagree. Maybe you got lucky, maybe you’re just BS’ing. But either way, I hope the OP doesn’t fall into a booby trap.

And yumpin yeezus, nobody’s talking about "understanding HTB." My first point described how a dual-purpose system would have to be operated when configured WITHOUT bypass. Maybe you can explain how a double-duty non-HTB amp would work without having to tweak volume levels as I describe.

D

Respectfully disagree. Maybe you got lucky, maybe you’re just BS’ing. But either way, I hope the OP doesn’t fall into a booby trap.

@cundare2 You can respectfully disagree all you want but you’re wrong, and the only booby trap is the one you set in your own brain.  All that needs to be done is to properly set the channel balance for all speakers with the AVR (as you’d normally do) at a known fixed reference point on the integrated’s volume control and you’re done.  So to switch from stereo to HT you just switch to the correct input (as you would with a HT bypass) and set the integrated’s volume to the predetermined reference point and that’s it.  Done.  There is no need to continually have to reset multiple volume levels as you said, and the only additional step versus having a HT bypass is having to have the integrated’s volume at the reference level for HT and everything remains in balance unless the channel balance is again changed on the AVR.  Very simple.

So you’re basically confirming what I said and arguing with things I didn’t say.

Typical for @soix in trolling mode. Someone more interested in arguing than in actually reading other people's postings.

To quote a great man who doesn’t know his own limitations, "What are you even doing here?"

Without HT bypass, the two go out of sync every time you change either one. This gets even more complicated when the FL/FR receiver/speaker combination responds differently to numeric volume-dial changes than do the other channels. That is, you usually can’t simply turn up the integrated’s volume by 5 clicks in order to compensate for increasing the receiver volume by 5. Even setting default start-up volume levels on both components does not resolve this issue.

@cundare2 Virtually nothing you said here is correct as to how this actually works in practice and shows you continue to not understand the concept at all. I’m not going to explain why you’re so off base any further because, frankly, I don’t care that you don’t get it as long as the OP gets it if he even needs it. Sharp as a bowling ball you are.