How best to arrange cables in this room...


Hi all,

I may be moving my system to a new room in the near future, but the only drawback is the best placement for the speakers is on either side of the fireplace, which would mean my rack would need to go off to the side (image below - hopefully it loads).

In this arrangement, I'm not sure how best to run the speaker cables. Getting equal length cables would leave a ton of extra cable by the speaker closest to the rack. Also, I can't run the cable through the wall with the fireplace (which would be more ideal) so a solution to keep it somewhat hidden going to the far right speaker would be great since I don't love having cables all over the place.

I figure this is a fairly common 'problem' so wanted to get some ideas on how to go about it.

Worst comes to worst, I can put my rack in front of the fireplace, but id prefer to avoid that if possible.

128x128mmcgill829

Seems like the best option will probably be having junction boxes installed on either side to feed the wire through the fireplace enclosure to the other side. Shouldn’t be too terribly expensive to have installed.

That or hide in some trim somehow.

Either way, with this approach im looking at roughly 22+ ft long speaker cables (which is going to be pricey), but less expensive than getting mono blocks and a pre-amp, I suppose.

Ok...some things to consider then. Thanks!

Here.s what I did in a similiar situation and it works for me 😋

 

 

SORRY, couldn't resist...

My biggest concern with all this is having to get 22'+ long speaker cables and will be using a SET amp. I just...don't have room for the amp between the speakers :(

Every gas fireplace I have come across is basically a small, steel firebox with a 6"-8" exhaust pipe that gets routed outside the home, surrounded by wood framing and drywall, creating a huge "shell" enclosing a lot of wasted space inside.  You can have any local A/V or Custom Integration company fish the speaker cabling through the giant, hollow framed box to the other side with minimal effort and with no issues to the speaker cabling.