1. Home
  2. digital
  3. 166933-4269

Musetec (LKS) MH-DA005 DAC

Some history: I was the OP on a four year old thread about the Chinese LKS MH-DA004 DAC. It achieved an underground buzz. The open architecture of its predecessor MH-DA003 made it the object of a lot of user mods, usually to its analog section, rolling op amps or replacing with discrete. The MH-DA004 with its new ESS chips and JFET analog section was called better then the modified older units. It has two ES9038pro DAC chips deliberately run warm, massive power supply, powered Amanero USB board, JFET section, 3 Crystek femtosecond clocks, Mundorf caps, Cardas connectors, etc., for about $1500. For this vinyl guy any reservation about ESS chips was resolved by the LKS implimentaion, but their revelation of detail was preserved, something that a listener to classic music especially appreciated. I made a list of DACs (many far more expensive) it was compared favorably to in forums. Modifications continued, now to clocks and caps. Components built to a price can be improved by costlier parts and the modifiers wrote glowingly of the SQ they achieved.

Meanwhile, during the 4 years after release of the MH-DA004, LKS (now Musetec) worked on the new MH-DA005 design, also with a pair of ES9038pro chips. This time he used more of the best components available. One torroidal transformer has silver plated copper. Also banks of super capacitors that act like batteries, solid silver hookup wire, 4 femtoclocks each costing multiples of the Crysteks, a revised Amanero board, more of the best European caps and a new partitioned case. I can't say cost NO object, but costs well beyond. A higher price, of course. Details at http://www.mu-sound.com/DA005-detail.html

The question, surely, is: How does it sound? I'm only going to answer indirectly for the moment. I thought that the MH-DA004 was to be my last DAC, or at least for a very long time. I was persuaded to part with my $$ by research, and by satisfaction with the MH-DA004. Frankly, I have been overwhelmed by the improvement; just didn't think it was possible. Fluidity, clarity, bass extension. A post to another board summed it up better than I can after listening to piano trios: "I have probably attended hundreds of classical concerts (both orchestral and chamber) in my life. I know what live sounds like in a good and bad seat and in a good and mediocre hall. All I can say is HOLY CRAP, this sounds like the real thing from a good seat in a good hall. Not an approximation of reality, but reality."

melm
debjit_g
289 posts
 

Any of the owners experimented with power cords with the 005 ? I have couple in my arsenal that I wanted to try but thought of asking if you have a preference ?

 

Btw, at one time I owned 3 Furutech Flux 50 NCF version but I didn't keep any of them.

boxer12
8,656 posts
 

@lordmelton - No problem at all. It has been a fun experiment. As stated before, I liked the sound of my system better with the Flux 50 going to the power amp than going into the 005... But also liked the improvement it made to the DAC (lower noise floor) when placed there. That has prompted me to add a passive ground filter to the outlet powering the amp while leaving the Flux 50 running directly into the 005 DAC. This has produced a nice sonic improvement that I will leave as is for further evaluation.     

sns
4,218 posts
 

@klh007 I do like VAC, one of their amps was on short list of possible purchases some years ago, I expect  that would be nice combo with 005.

 

@debjit_g I've only used diy power cables based on  recipes @willywonka  has developed over the past few years. They're called Helix Image, the particular recipes I've been using are the best power cables I've either auditioned or owned. I'd like to think I'm fairly experienced with pc as I auditioned many over the years through lending library at Cable Company.

 

 My Helix provide unsurpassed transparency, resolution and dynamics very nice. My favorite recipe is built with VH Audio Airlock wire, number of runs depends on component its powering. The only other high end pc I have at present is VH Audio Airsine, also very nice, went with them at end of auditioning process. Other pc's I recall having good results with were Shunyata Anaconda, Purist Audio Design Dominus, top of line Synergistic, I'm sure there were others, can't bring them to mind at the moment.

 

As for connectors I like the better Furutechs, also Connex brand from Partsconnexion, I get these exact connectors cryo version from Chinese seller, really quite nice at much more affordable price.

melm OP
1,086 posts
 

@debjit_g 
I've been happy using Viborg VP1606 power cable first recommended by a cable guru on another site.  My first was long and I had to terminate it, not so easily done as it's a big cable.  Since then I see that they are available terminated, and at Amazon.  The only negative is that they are quite stiff.  Since as Musetec folks we like to look inside, here's what's inside the Viborg.  Scroll down.

melm OP
1,086 posts
 

@sns

I gather that the Muon ($1312) is an Ethernet filter at a higher level than the Eno filter ($704) from the same source. Both are entirely passive devices. Have you (or anyone else here) used either of them? Do other devices in the chain have the same or similar effect?

Also, placed between a switch and a streamer, there seems to be no need for the extra streaming cable offered. Would that be correct?

More to discover