Yamaha as-3000 with Denon dL-103R low output MC cartridges

Vuth...:

Wow, an Audiosylum member for many, many years and this is your first post.

Welcome to the forums - konnichiwa.

DeKay

Thanks @dekay for encourage me.
Up to now Im playing with PC and usb DAC hookup to my integrated as-3000 above. Things so simple with things like wasapi on windows to get bit perfect etc. That's why up to now I not posted questions. But I actually has been read hundreds of articles here and there for learning and going down the road with correct path.
 
Now I just entered vinyl analog and things became too complicated to be aware of in advanced before press buy button:) However things getting simpler gradually.
Thank you very much. 

OK:

Here's a brief discussion of loading on this particular cartridge...

https://www.vinylengine.com/turntable_forum/viewtopic.php?t=89580

It seems that 100 ohm and above is preferred (as for the sound to not be too sterile/bright), but I again ask if this can be adjusted by the cable choice (meaning the cable from the TT to the amplifier)?

Anyone care to chime in on this phono cable question?

DeKay

Here's an article that may help...

I had the impedance reversed as a lower value will usually sound warmer (less bright).

It looks as if the cable (capacitance) is not that important with moving coil cartridges.

https://www.mysonic.space/phono-cartridge-impedance-loading

DeKay

thanks @dekay . You are so kind!.