I have never seen them.Post pics if possible.Guessing they are common and not custom as jacks are USUALLY designed for many loads/jobs.Is it the price or usefulness you are concerned about?
- ...
- 8 posts total
Wilson Audio makes the jack for the Maxx speaker which I have used (borrowed from the previous owner, he will not sell me the jack) with great success. It is a work of art, machined from billet aluminum and very slim to fit under the speakers. I think that you can buy one from Wilson for nearly $1000, which is consistent with his overall pricing policies! I'm sending pictures to a friend who has a home metal shop to see if he can reproduce a similar jack for me. |
No, you center the jack under the speaker’s center of gravity and raise the jack and the speaker lifts straight up. Replace the casters with spikes, lower, remove jack. The spikes are tall enough they keep the speaker off the floor enough so you can remove the jack, it’s only 1” tall. The main difference between the Wilson jack and the auto jack is that the Wilson has a flat plate that lifts up and the auto jack has a slightly U-shaped saddle. I suspect you might want to place something on the saddle to make for a flat lifting surface like the Wilson has. I’m sure you can come up with something for the $480 price difference between the two (the Wilson jack is $700.) 😁 falcio, did you find something for the saddle or is it not curved enough to dig in? http://parts.wilsonaudio.com/wilson-audio-flat-jack/ https://www.calcarcover.com/product/low-profile-billet-aluminum-jack/705 https://youtu.be/_4gdT8gjNaQ |
- 8 posts total