2. misc-audio
  3. 156719-128813

Dedicated 20 amp circuit - Electrician laughed!

I brought my electrician out to my house today to show him where I would like to install a dedicated 20a circuit for my system.  He laughed and said that's the stupidest thing he's heard and laughs when people talk about it.  It said, if you're going to do it, you have to have it separately grounded (shoving a new 8 foot rod into the ground) but even then, he sees no way there can be an audible improvement.

Now, he's not just an electrician though. He rebuilds tube amps on the side and tears apart amps and such all the time so he's quite well versed in audio electronics and how they operate.

He basically said anyone who thinks they hear a difference is fooling themselves.  

Personally, I'm still not sure, I'm no engineer, my room's not perfect, and I can't spend hours on end critical listening...  But, he does kinda pull me farther to the "snake oil" side and the "suggestive hearing" side (aka, you hear an improvement because you want to hear it).

I'm not taking a side here but I thought it was interesting how definitive he was that this not only WILL not make a difference but ALMOST CANNOT make a difference. 
dtximages
rilbr
97 posts
 
Find another electrician. Satisfaction is almost unanimous among those who have installed a dedicated line. Note: Noise reduction at the breaker panel really helps, and this is where to install surge suppression. Don't let the surges get into the house.
Your electrician mentioned a "separate ground rod". This is illegal and almost impossible. 
He should have said: An ADDITIONAL ground rod. And ALL the ground rods must be connected together and attached to the ground buss in the panel (per NEC code). This reduces resistance to ground, which is desirable.
Avoid such over opinionated people. Use someone who works with you, not against you. 
alexaudio
1 posts
 
We should take into account that the power feeding your house is effected by every other household tied into the same transformer grid, even with a dedicated line you are still subject to degradation caused by other customers, especially during peak hours of electrical consumption.  An isolation transformer with line conditioning would work wonders essentially isolating your home from other homes, of course this is costly, I utilized some isolation transformers with filters in a couple of my systems which helped, I was experiencing humming sounds in many of my components with torodial transformers during peak hours and detected with an oscilloscope DC voltage riding along my A/C sine wave in my house.  PS Audio and several other companies have made great effort to combat such voltage pollution.
geoffkait's avatar
geoffkait
23,365 posts
 
Back in the day, when I was still on the grid, I employed capacitor banks plugged into many unused wall outlets around the house with power cords. The values of these capacitors are provided on the David Magnan Audio site. I even had a bunch of humongous oil filled caps from some decommissioned Navy comm installation.
invalid
1,085 posts
 
I just installed a sub panel in my dedicated audio room which is a separate building from my house. I had to isolate the neutral wires in the sub panel and install a grounding rod, should I connect the grounding rod to the grounding rod on the main panel.
Post removed 
More to discover