Should I be able to hear a 4Hz difference in my speakers?


I have just upgraded from a Totem Hawk speaker to a Forest Signature speaker. The Hawk's specs are 32Hz - 21kHz. They have a 5.5 " long throw driver.
The Forests specs are 28Hz - 22kHz with a 6.5" woofer. The Forests are physically bigger too. 
I can hear the treble more clearly and more detail with the Forests but no more bass than with the Hawks. Should I be able to hear more bass with the Forests or is the difference in specs inaudible?
128x128traceyc
You can't hear 4 Hz.

There are many other things that are going on, from the frequency response, difference in distortion in the drivers as well as the dispersion.

The frequency range specifications don't really do enough to tell you how the speaker balance is set.

Enjoy!
Should also say, as some one who loves 2-way speakers, if you want to hear better bass, consider the room acoustics. They can make your speakers sound bigger and tighter. Talk to GIK Acoustics and in particular ask them about their soffit traps.


I most recently went from Vandersteen 2Ce Sig II (manufacturer spec -3 dB at 29 Hz) to Thiel CS2.4 (manufacturer spec -3 dB at 33 Hz). Using a tone glide in my system/room, I could hear some output from the Vandersteens down to the mid 20s. With the Thiels, I don’t hear much, if anything, below ~30 Hz.

But in terms of music, the only song in my collection where I could hear a difference in terms of bass *extension* was Tracy Chapman’s "3000 Miles". That song has an organ tone that had at least some weight via the Vandersteens but is barely audible via the Thiels. The Thiels can reproduce everything but the left most key on a piano, so they capture virtually all musical content. In regards to bass *quality*, the Thiels are tighter and better defined than the Vandersteens.

So, yeah, I think it’s possible to hear the difference in bass extension between those Totem models but only on a tiny subset of songs.