Bob, implementing this highpass in a post-amp crossover will require some really large values. To design this correctly would take knowledge of the drivers and the network in use. It would make sense for a poll that low in frequency to look to an active line level crossover solution. There are good ones for a couple hundred bucks.
Why the obsession with the lowest octave
From what is written in these forums and elsewhere see the following for instance.
Scroll down to the chart showing the even lowest instruments in this example recording rolling off very steeply at 40 Hz.
http://www.homerecordingconnection.com/news.php?action=view_story&id=154
It would appear that there is really very little to be heard between 20 and 40 Hz. Yet having true "full range" speakers is often the test of a great speaker. Does anyone beside me think that there is little to be gained by stretching the speakers bass performance below 30-40 cycles?
My own speakers make no apologies for going down to only 28 Hz and they are big floor standers JM Lab Electra 936s.
Scroll down to the chart showing the even lowest instruments in this example recording rolling off very steeply at 40 Hz.
http://www.homerecordingconnection.com/news.php?action=view_story&id=154
It would appear that there is really very little to be heard between 20 and 40 Hz. Yet having true "full range" speakers is often the test of a great speaker. Does anyone beside me think that there is little to be gained by stretching the speakers bass performance below 30-40 cycles?
My own speakers make no apologies for going down to only 28 Hz and they are big floor standers JM Lab Electra 936s.
- ...
- 130 posts total
- 130 posts total