1. Home
  2. amps-preamps
  3. 150922-134708

Proceed AVP just stopped working-fuse is fine-PLEASE HELP!

I just picked up the preamp and absolutely love it! But last night I turned it on and I thought I saw the display light up for a split second(?) and no power! I removed the cover and found a small glass fuse on the left rear of the unit and checked win my ohm meter and it’s fine. I want to cry! Any ideas out there folks? I know they are out of business now and just hoping any one has come across my situation. Thanks in advance everyone! Dave
dogger
dogger's avatar
dogger OP
8 posts
 
Wow!..I knew there had to have been someone else who had the same problem! I truly appreciate your response and I am going to take her apart now and take a look! I will let you know what I find... Thanks again Dave😎
dogger's avatar
dogger OP
8 posts
 
Sure enough...it was the inner fuse that was blown!..thanks for sending me in the right direction!..it’s  a 250v fuse I believe(I swapped the outer one with the inner and jumped the fuse and it powered up! JB YOU ARE THE MAN!👍
dogger's avatar
dogger OP
8 posts
 
I was able to pop it out with tweezers rather than remove the board..😎
dogger's avatar
dogger OP
8 posts
 
Hey there...FYI, fuse blew after a few minutes so I swapped out the fuse, and that one blew after turning it on so I think I have bigger problems!
😔
mark2325
1 posts
 

@dogger I know this is an old thread, but were you able to find a solution for the fuse blowing? I have the same model and it blew the inside fuse twice, but it seems to be fine now. 

More to discover