Pass amp paired with audio research pre?


 Wondering if anyone has had experience matching a pass labs amp with an audio research preamp. Do they make a good combination?  Thinking  about audio research reference 5SE matched to one of the X series pass amps. I have Harbeth 401.2 speakers...kind regards 
128x128fanotunes

@fanotunes, Tim deParavicini's EAR-Yoshino electronics don't get much love here (though they do elsewhere, including at Positive Feedback by Robert Levi, and in the UK press, especially Ken Kessler in HFN&RR. Ken loves Tim's stuff), but his 868 and 912 pre's are designed to drive a 600 ohm load. Paravicini does a lot of work in pro studios (including Pink Floyd's), where 600 ohms is the standard.

Those pre's have no trouble driving a 10k ohm power amp input. They also are fine sounding, the 868L being noticeably better imo than the ARC LS-16 (I've had both). It had better be, costing over twice as much new, and twice as much used! It is a pure-tube design, the LS-16 a ss/tube hybrid (as are all the LS models). By the way, your RM-200 is called by some a hybrid design, because of it's bipolar input stage (the driver and output stages pure tube), which po's Roger Modjeski. But that's a story for a different thread ;-) .

 Thank you, everyone, for the responses. Sorry for the late reply. I’ve been traveling for the last two days ( 23 hour drive from Spencer, Iowa to Beaufort, North Carolina! )

 Thank you for the discussion regarding input and output impedance. I learned something there! 

monoogan: 

If I understand correctly, you were running an x350 with a ref 5.  No issues with impedance.  What sort of music do you listen to? And how does it sound? What sort of speakers do you have? 

I really hope moving from the LS 16 to the Ref 5 will solve my concerns as i’ve always liked my Music Reference.  If not, a Pass amp may be the next step.

My system seems just a bit too polite. Right now, I am attributing that to the LS 16. If not that, thinking a more powerful  solid-state amp will help.

Could also be the transfiguration proteus as it seems pretty laid back too...?

@fanotunes, I would attribute the lifeless sound you hear to the LS-16 before the RM200 (I've owned both, and dumped the 16). Check into how ARC creates the balanced XLR outputs on the LS-16. Since the RM200 has true balanced inputs, you may as well feed it a true balanced signal (though it will accept unbalanced without modification or sonic penalty, says Roger Modjeski). In his EAR 868 (and in the 912), Tim deParavicini creates that pre’s balanced outs by way of transformers (standard in recording studio equipment). Though I don’t know it to be true, it may be that ARC does so with opamps, which is very common in consumer gear.
Why not pair a Pass pre with the Pass amp? Both are excellent pieces of equipment and should match well.
Thank you for your note.  Obviously an option to consider as well.  Had thought to stick with the tube preamp. Like the audio research stuff. But certainly in option to consider as well