Can I use 2 two channel amps to run a 3 channel system? leaving one side of an amp unused

Can I use 2 two channel amps to run a 3 channel system (left, right and center), leaving one side of an amp unused?

dante707-18-2019 10:23pm

dante7 OP Details Discussions Posts This discussion Message User 34 posts 07-19-2019 at 02:38pm Copy Comment URL Report Comment Edit Delete The signal will be for a center channel from an AVR. Wouldn't the summed power be too much to the center?
atmasphere Details Discussions Posts This discussion Message User 11,577 posts 07-19-2019 at 02:55pm Copy Comment URL Report Comment Edit Delete If a tube amp you might be able to remove the input tube of the unused channel- that would remove the need for a dummy load at the output (which is not needed on all tube amps BTW). You might also be able to remove the output tubes of that channel as well- but in this regard I would check with the manufacturer.
dante7 OP Details Discussions Posts This discussion Message User 34 posts 07-19-2019 at 03:04pm Copy Comment URL Report Comment Edit Delete The amp is a bel canto ref500s.
audiotroy Details Discussions Posts This discussion Message User 3,588 posts 07-19-2019 at 04:59pm Copy Comment URL Report Comment Edit Delete Many Class D can oscilliate without a load, use a dummy resisitor or find a mono Ice amplifier. Dave and Troy Audio Doctor NJ
Post removed Jul 19, 2019