Bryston SP3


I am considering replacing my 2 channel YBA 2 Preamp with a Pre/Pro such as the Bryston SP3 in order to move my main home system (YBA/Genesis Technologies V)  from 2 channel to 5.1 home theatre.  The Bryston SP3 has been around a while, but is still currently offered by the manufacturer and can be found on the used market for about $4500.    I have not looked at new equipment for some time and wanted to know if the Bryston SP3 is still considered good value compared to current offerings.

Enter your text ...
joe11554
I believe Bryston is keeping the SP3 product as an option for people who don't need or want a more expensive 15 channel Dolby Atmos, etc. processor.  The SP3 uses their Class A discrete analog circuits, which I believe they are re-engineering into the new SP4 as well.  So as far as audio circuits go, they are not changing anything with the new products.
----
I think the SP3 only has one input that supports 4K video (if that is a concern).  Since you're buying it primarily for a preamp replacement, the "HT Processor" part is not as much as a priority for you. 

--
For voicing, I honestly think the SP3 has a laid back sound in the mids and upper mids.  Extremely excellent bass!! (best bass in a processor I've seen).  The SP3 has a massive main power supply, but no real power filtering capacitors on the audio circuits themselves.  So the sonic signature is definitely not a very forward sound. 

---
In comparison, the YBA might be a better preamp in this sense, but I can't say for sure, as I've never heard it.  The SP3 has fully balanced input stages and fully balanced output stages.  The signal is converted to single-ended internally for volume/balance.

I am presently very happy with the YBA2 preamp, but the primary purpose of the Bryston SP3 is to incorporate HT while maintaining a high end 2 channel system.  Therefore, the HT performance is a strong consideration in my purchasing decision.  In short, I want the best of both world, HT and 2 channel stereo. 

Its good to hear that Bryston will probably keep the SP3 a current product for some time, since upgrade/update path is important for future of the product.  Although the SP3 has all of the latest features, I would hate to find out 2 years later that I bought into older technology without an update/upgrade path.

I have not looked at equipment in a long time and I do not have access to auditioning equipment where I live.  So can you think of alternate equipment that I should also take into consideration. 

I need the Pre/Pro to have:

1) both RCA and balanced outputs to amplfiers

2) Two RCA and balanced outputs of Left/Right front speakers since the Genesis Technologies need a output for the subwoofer servo-amp and a second output for the mid/high speakers.

3) HDMI ports

4) USB ports since I am going to incorporate a Innuos Zenith MK III music server into my system.

thank you for getting back to me and your comments are welcome.

1) both RCA and balanced outputs to amplfiers ==> Most HT Processors actually have both RCA and XLR outputs. Some of the lower cost or older ones only have RCA.

2) Two RCA and balanced outputs of Left/Right front speakers ==> The only processor I know that actually has this is the Classe SSP-800. In my opinion, the Classe will be somewhat on the solid-state edge sound in comparison to Bryston/Krell. The Bryston does have L.AUX and R.AUX outputs, but they can only be set to do a stereo down-mix of all the channels. So, you would be getting left/right signals, but also signals from center/surrounds through this. You can do this if you want -- use the L.AUX and R.AUX to supply the servo bass amp, but be aware that it's a "summed" audio signal (not just left/right). If you want true left/right, your best bet is to use a Y-splitter cable (or choose the Classe SSP-800).

3) HDMI ports ==> most HT processors have HDMI nowadays, even previous generation models. But only the newest processors support 4K and Atmos/etc -- if that is a concern for you. I believe the later versions of the Bryston SP3 has one HDMI input that supports 4K.

4) USB ports since I am going to incorporate a Innuos Zenith MK III music server into my system ==> It looks like the SP3 does indeed have a USB port that accepts a digital audio input. This is probably the only HT Processor that supports this. If you find a USB input on any other HT Processor, it is only there for firmware upgrade or remote control codes. You should also realize that you will not be able to support DSD playback in an HT Processor. HT processors are also clocked best support 48khz sampling rate (which most movies are produced in). Any other sampling rates are probably going to be a compromise (but still sound good). If you want a really good music DAC, you should look at an external DAC. Also, if you are not locked into the Innuos, you could look at a different streamer that has digital COAX output (such as AURALiC Aries G1). This allows you more flexibility in choosing a HT Processor.

-----

In my opinion, the best analog stages in HT Processors belong to either Bryston SP3 or Krell S1200 (1200U / 1200U 3D). Both are the only processors that have fully discrete Class A audio stages (everything else pretty much uses op amps, including Classe SSP-800). Both have benefits and drawbacks. The Bryston SP3 is excellent bass, but mids/upper-mids are too laid back for movies -- it is just not exciting enough and doesn't have enough attack. I think the digital DSP/DAC board in the Bryston is compromised (they use an off-the-shelf DSP/DAC board). The Krell does not suffer from laid back mids/highs and it has incredible resolution, but it can sound somewhat bright/thin stock. The fix is easy - solder some big caps directly onto the rectifier pins for the analog and DAC power supplies. This gives the power supply more capacitance because the Class A audio stages are very demanding. The Krell power supply is undersized, in my opinion. It's basically half the size of the Bryston SP3 main power supply. Also, Krell S1200 does not support 4K.

Oh, Bryston SP3 is pretty locked in. It will not really have any "upgrade path" per say. Pretty much all HT Processors are "locked in" with the exception of a few. Krell Foundation and Emotiva XMC have had HDMI board upgrades.   NAD, Meridian and Theta Digital are designed to have module’s that can be replaced.