$300 for older Rotel/Outlaw or do something else?

For my above post, I now realize that I can switch Blu-Ray up to 1080i with the Rotel, but HDMI is required for Blu-Ray output at 1080p. Component cables and the Rotel may be able to handle 1080p, as some 1080p PS3 games apparently can be sent over component cables, but the Blu-Ray spec does not permit it. Or so I've read. Since my panel is 1080p via HDMI or DVI-D, I can output directly to the panel for 1080p Blu-Ray.

The 606/607 should have 'pre-outs' not to be confused with the multi-ch in's. What are you using now? What is your goal. You have ideas but pardon me...no certain goal.direction. What do you want? A modern recv'r or prepro that cost less today than yesteryears 1500 dollar unit will most likely outperform the older. Technology was new and came at a premium. The technology as well as demand has brought prices down all the while getting better at function/versatility. You are quite limited with your budget and you will benefit by purchasing a newer recv'r rather than an older prepro.

I can't find the pre-outs on the Onkyo (other than those mentioned above), maybe I'm missing something, here's the link --> http://www.us.onkyo.com/model.cfm?m=TX-SR607&class=Receiver&p=i

I'm just trying to go from the 2 channel world to the 5 channel world using exiting equipment that sounds great and that I love.

I picked up a Harmon Kardon HK-3480 receiver to fill in for vintage Nikko separates. It is a very well rated receiver with the same wattage as my amp (120wpc). However, it doesn't come close to moving my Snell Type D speakers like the Nikko amp. Not even close.

That is why I'm hesitant to consider an all in one entry level unit. I have three of these amps and in addition to the Snell Type D's for fronts, I have Snell Type M's for the surrounds and a Snell CC-1 for the center. (As an aside, Snell marketed that exact speaker setup in 1996 as "The Dragon Slayer Music & Cinema System".)

At this point, I'm planning on going with the Rotel RSP-1066. I'll add a sub, if I like what I'm hearing.

I just wanted to find out if I was missing something, but it seems that this setup will at least sound O.K. It is the Dragon Slayer after all.

Alpha...I stand corrected concerning the 606...no pre-outs. Bummer. Perhaps the 700 series has them. Nonetheless, I think you will be fine for getting into 5.1 with your choice as you seem really attatched to your spkrs. I am a 75% music guy myself and that's my primary concern with rig. Not familiar with the Rotel but if it has multi-ch in's you can use an oppo br or any player with onboard processing of the hirez codecs. You will love yourself for doing so. Let me/us know how it goes. Multi-ch music is awesome btw...a real treat when done right. I bought an Oppo 83 which will do everything music and video wise and it will be a mainstay far after the other gear is changed out.

I have an Outlaw 950 and am very familiar with its I/Os and capabilities. It's a very good analog line stage.

I recommend (as Mmnc also did) that you get a Blu-ray player with on-board processing and at least 5.1 channel analog outputs. Then connect the HDMI cable from the Blu-ray player directly to the TV to get 1080p video only, and use 6 RCA interconnects to connect the Blu-ray player's analog outputs to the Outlaw's analog inputs. The Outlaw works very well in this mode and you'll get lossless surround when the disc is encoded with TrueHD or DTS-HD Master Audio.

Just be sure you get a Blu-ray player with onboard decoding and full analog surround outputs. The Oppo certainly has it, but so do some of the Panasonics. It's mostly the entry level players that don't.

The Outlaw 950 is only so-so as a digital decoder, but it is an *excellent* line stage and controller preamp, whether in stereo or multi-channel.