Velodyne Digital Drive Series subwoofer in stereo



Hi, I've been very interested in running two subwoofers in stereo (diff. signals to each subwoofer); I've heard many people swear by this setup.

My next room for my system will be 14' x 14' x 18' high ceiling loft living room. My question is, will two DD10 be enough to fill the room with organ music and scare me out of my seat for movie tracks? Should I move up to two DD12s? Money is not really an issue, but I'd like to save wherever I can.

Any help would be appreciated. Thanks,
spacekadet
I just found this on the Anthem website...

Q20: I have two subwoofers and want to use them in stereo. Can the surround preamp's subwoofer outputs run in stereo?

A: No, although the same job can be done by disabling the sub channel in the setup menu, then hooking up the subs through their own crossovers to the front left and front right channels. This is not recommended because a stereo subwoofer configuration has little value. Few recordings contain real stereo bass info, (e.g. large pipe organ using widely spaced microphones) and unless the subs are located outdoors and away from the ground, they can't reproduce it anyway. Inside a room, running them in mono instead is beneficial because they can be moved to wherever they create the least amount of resonance individually, and as a combination, make each other's response peaks and valleys less severe. As well, a "bass spaciousness" effect can be dialled in with the phase control if it's available on one of the subs (which is what happens when two widely spaced microphones pick up a low frequency source - same long wavelength, different phase between the two).

FYI...


Thanks Sailfishben,

I was going to buy a Velodyne DD10 for my bedroom and then add another one when I move to my new apartment, but I found a really good bargain for DD15 and ended up ordering that... I'll update my system as soon as the subwoofer arrives.
GREAT... so glad you obtain the 15" driver. Simple math tells you it's 50 percent larger, which as Yogi would say, is a lot! Anyway if you stumble on the set up, e-mail me. I'm no installer but... Enjoy!

The DD15 will be here any day now.

Sailfishben, as far as math goes, you should focus on the surface area instead of the length. The 15" driver has over double the surface area of the 10" driver. Actually more than 2.5 times as much considering the DD15 has 12.7" piston and the DD10 has an 8" piston.

I'm really happy to find a new DD15 at a really good price and can't wait to hear it!
The Velodyne DD15 is here! This thing is really ridiculous. The whole setup took me less than an hour and the bass frequency response is pretty much ruler flat except for a bump at 50Hz due to the tiny room.

I've talked to couple of my professors at U. of IL. and they convinced me that two subwoofers running in stereo makes no sense. After hearing the Velodyne DD15 in my system, I have no regrets and am no longer curious about two subwoofers.

I'm sorry to end this thread this way, but the DD15 and two professors from my Aerospace and Electrical Engineering department have convinced me that one subwoofer is all I need.