Putting your components inbetween your speakers.

OP, while it seems you are getting basically a universal response that nothing between the speakers is "best", rack and gear placed lower than the tweeter/mid second best and so on, there is one other thing to consider... The *plane* of the items. I recently moved my speakers forward (closer to PLP, further from front wall) of my audio/video rack. So while my television and other gear is still "in between" the speakers, all items collectively are no longer on a straight line of sight (when viewed from the side walls). So you might want to add moving the speakers forward a bit to any experimentation you're conducting.

If a rack and components (or screen) MUST be between the speakers, one way to minimize the damage is to place diffusers on both sides of the rack(s) and/or screen, parallel to the side walls. When the sound coming from either the rear of planar speakers or sidewall reflections reaches the diffusers, that sound will be intercepted and randomly dispersed by them, rather than reflected off the rack and EQ.

Update. I did wind up moving my 2 stands further back from where they were in the middle of the speakers and i swear i could hear better imaging from my B&W 800 matrix.. Maybe its in my mind maybe not. But i do like it !!! Thanks to you all.... 

So now there is NOTHING in the middle of the speakers. 

So now there is NOTHING in the middle of the speakers.

I think what you mean to write is "So now there is NOTHING **directly and at the same plane** in the middle of the speakers. ", correct? :)