My JL Audio sub is dead. What exactly happened?


So at my wife's request, I hooked up a Roku to my main system. Roku is a device for internet streaming movies and tv. The connection between the Roku and my preamp, a Meridian G68, was a 12 foot optical cable.

The first night, I hook up the Roku and it works perfectly.

The next night, I move some cables around, then I hook up the Roku again, exactly the same way as the previous evening. I get picture but no sound. Weird. I pondering what I might have done wrong when out of the speakers... POP. POP! POP!!!

Uh oh.

I dive for the amps, switch them off. The POPs stop immediately. But...

Now there's a TERRIFYING HIGH PITCHED PULSATING NOISE coming from somewhere in the room. I finally realize it's coming from the sub, a JL Audio Fathom 113. I dart across the room, switch it off.

I stand frozen, savoring the final moments of the fantasy that maybe things aren't that bad.

Here are some questions in no particular order...

1. I suspect the amp in the sub is fried. Does that sound right?

2. Where did those POPs come from? Could a damaged optical cable do it? Or maybe the optical cable wasn't fully seated?

3. Do I really have to ship this 150 pound sub to Florida? Or do you think there's any chance of finding someone local to fix it? (I'm in L.A.) The sub is out of warranty, btw.

4. I tried to take the panel off the rear of the amp (I know, lethal voltages inside) with the thought that maybe I would just bring the amp portion of the sub to someone local to fix. I removed about 12 screws from the rear panel and still it doesn't budge. Why can't I open this thing?

If you have any suggestions, I'm all ears. If not, thanks for reading.

Bryon

P.S. The rest of the system appears to be fine.
bryoncunningham
Hello gammaman,

I am very grateful for your help and for the information.

If you still have the amplifier in view, could you tell me the numbering of the R542?

I will also consider the replacement of the 35v / 100uf cap.

Thank you very much.
To be fair to JL, I still have the same sub I mentioned in my March '17 post.  To recap, I am on my third one now.  This time my dealer replaced the amp with a new one sent by JL almost a year ago, and I have been using it a lot with no problems since then.  Perhaps they figured out what was wrong in their amp modules. 
My f112 started rumbling last week, audible from about 8’ away. The sub turns on and the rumbling sometimes goes away after I turn off the unit for a few hours. It was fine for a few days but the rumbling has returned again last night. Was told by JL Audio that the caps need replacing along with amp or power supply(not really sure about this) and that the sub will eventually not turn on in the very near future.

How easy is is it to replace the caps? Does replacing them solve the problem in most cases? Really trying to avoid shipping this thing and my warranty has expired. This is the second time I’ve had a problem, the first being in 2012 but it was still under warranty then.

I would really appreciate any input and advice on the matter.
Wasn't this from JL Audio initially getting substandard parts from their suppliers? I had one control module replaced and have not had any further issues.