HT pass through or 2 sets cables?


I have a chord integrated amp for 2 channel and an arcam avr300 for video processing and surround sound. I want to keep the chord for two channel to power my maggie 1.6's, which are part of a theatre system. Would it be better to use the chord and pass the signal to the arcam and have the arcam control the whole system for theatre or just get 2 sets of speaker cables?
dgplo
Home theater pass-through would be best. 2 sets of speaker cables would require either manually changing them when you changed amps, or hooking up a switch box of some sort. You shouldnt hook up 2 amps to one set of speakers at the same time.
I have a similar setup and can vouch for the HT passthrough option. I am using a Musical Fidelity integrated and an Arcam AVR200. The pass through works perfectly.
does your musical fidelty have a pass through button, when you push it, you have automatic unity gain? my chord integrated does not have this feature. would i use one of the sections of my chord, say the video output and run interconnects to the arcam? how would i equalize the volume?
Ah...you have choices to make then. I assumed you had the HT passthrough. I limited my search to integrateds with this feature in order to eliminate having to match volume levels of two amplifiers (yes, the MF has an HT bypass). Prior to my MF I was using an old Audiolab 8000A integrated (no HT bypass) with a Yamaha HT receiver. Yes, you can get it to work with acceptable results...take your amp out on the Arcam into one of the inputs on your Chord (other than phono of course...maybe you should see if one input is close one signal strength needed to that which the Arcam outputs). The trouble is that you will have to set the volume levels close enough to get a balanced result. Purest might poo poo this idea but who cares when it comes to movies? It will be plenty close enough and you woun't ever know the differnce...main speakers are effect speakers in an HT system anyway...your center channel is the real workhorse unless you sellect a mode where the mains are equal to it or are driven in place of the center channel. But in either case you will be fine. I would say this is a better option than running two sets of wires, but you will not have the remote controll volume adjustability that all of us love with movies.