2. speakers
  3. 1019248887

Would you like to know about Dunlavy mods?

I have done extensive mods to my Dunlavy SCIV's over the years. It has been quite a learning experience in component upgrades such as capacitors, resistors, inductors, internal sealing of the wood of the cabinet, nuts, bolts, internal wiring , external crossover isolation, speaker platorms, Sistrum platforms and baffles to minimize bass cacelation. I suppose that was an example of a run on sentence. If any one would like to know more please contact me.
theaudiotweak
vn101606
73 posts
 
I have a pair of Dunlavy SC-VI, and I am considering upgrading the binding posts, resistors, capacitors. Probably with Duelund cast copper or silver components and Furutech top binding posts.

Perhaps also bi-amp them using an active crossover like the Krell KBX and a second pair of Krell FPB 750mcx.

Does anyone have the SC-VI crossover schematics and/or high-pass and low-pass filter frequencies?

Thanks!
vn101606
73 posts
 
Hello!

I have pair of Dunlavy SC-VI that I would like to upgrade the binding poles (with top Furutech), crossover capacitors and resistors, and perhaps bi-amp with an Krell KBX crossover.

Does anyone have the crossover schematics of the SC-VI or at least the low pass and high pass frequencies?

Thanks!
615098's avatar
615098
1 posts
 
Hey - I just decided to raise my Dunlavy SC-IV/a by adding the supplied bases, but have lost the original bolts. Does anyone know the size/metric/US, etc?

Im going crazy going back and forth to the hardware store. 

Thanks, 
Derek

timber77
39 posts
 
I tried to lift  up my sc 4s  and help you out on the screw size ,but they are too heavy for a one man job.   I would get 8 of every screw size thats close and return the rest.. i think mine were about 3 inches long, but is been many years since i moved them.   Good luck and the bases with probably help tighten up the low end.

ruraltom
12 posts
 
Hello! 

This is an ancient thread but seemed like, perhaps the best way to contact you short of trying through Star Sound Technologies...

Looking to potentially recap/refresh my Dunlavy SC-IVs and had a question or two.

Thanks
Tom
More to discover