what does a power conditioner really do?

It’s interesting that lately we are seeing more "quora " type questions here, meaning short questions about general concepts rather than "is component X good?" Or pitting 2 components against another. Hopefully it means younger people coming to the hobby since Quora seems to aim at a younger demographic.

There are some great Garth Powell videos on youtube that describe exactly what his products do, and they are worth watching.

https://m.youtube.com/watch?v=SfX--NEQsTE

He explains that there is 10,000 times more noise on the AC lines now compared with the 1970’s and that low level ambient cues can be 50’or 60 DB down in non compressed recordings, and that the power line noise covers those low level signals up. After hearing the 7000 in my system I can attest that this phenomenon is easy to hear.

Garth had been designing power conditioners for Furhman for 18 years or so and developed some great concepts, and then was hired away by Audioquest to build a much higher level product than Furhman was interested in, since they cater to the pro Audio world.

His Niagara 7000 (which I became an audioquest dealer for to be able to sell) has the ability to provide 90 amps of current for peaks, (which has an amazing effect on amps) in that micro dynamics are enhanced even when the amps are not being pushed hard. It’s one of the few active conditioners that is good for amps.
It lowers the inductance on the line so it’s easier for electronics to draw current.

Previously I was using an Acoustic Revive passive unit which itself had sounded better than an active unit I had.

The 7000 has 3 galvanically isolated zones so (amps, analog, digital) each have their own section, and features patented ground noise dissipation.
The nice thing is dedicated lines are not needed since an entire system is run off 1 line, and power is cleaned and stored in reserve reservoir for use.

As Garth says this has the effect of moving your house next to the power companies substation and running an 80 amp line to your system.

I will do a review of the 7000 with some sonic observations but if anyone in the NYC area wants to hear it in action (and on BHK 300 amps and the new bhk preamp or Atmasphere gear) contact me at www.triodepicturesound.com

There is also a much lower cost Niagara 1000 that has much of the bigger units tech without a transformer for amps.

Power conditioner is a vague term to describe most any device that might affect power.  Most power conditioners do not even address half of the anomalies that others have described.  Most who recommend these expensive devices ignore spec numbers.  And do not know that many power conditioners would sell at well less than half the price - and still have an obscene profit margin.

We presented a fancy conditioner to some to try.  They could hear greater clarity.  Then we opened it up.  It was a knot tied in a wire.  Yes, even a wire knot is a power conditioner.  Amazing how a knot created greater clarity - because it was in a fancy box.

Does not matter how 'clean' AC power is.  Because that power is converted even into well over 300 volt radio frequency spikes. Then superior and robust regulators and filters convert that 'now dirtiest' power into rock stable low DC voltages to power electronics.  Any conditioning done on the power cord is routinely undone inside electronics.  Then superior power conditioners clean that power.

So a wire knot does equivalent to an expensive Furman - and its fictional advantages of balanced power.  Even a wire knot conditions power.  Which means nothing when numbers are ignored.  And when one does not first learn how incoming power is intentionally made 'dirty' again.  Best power conditioner must already be inside your equipment.

Westrom have you heard the Furhman? You mentioned it’s "fictional advantages ."

While i have not heard it, in my above rant I mentioned recently acquiring (and being a dealer for ) The designers latest venture for Audioquest based on the things he developed at Furhman. however that company’s focus wasn’t high end audio so i can’t speak for its level of improvement.

The electronics I am running have excellent power supplies designed by veteran audio engineers. So the notion that properly designed equipment can’t benefit significantly from external power conditioning (even power amps) simply doesn’t hold up, at least in my system.

I also think environment plays an issue. Someone like myself in NYC faces different issues than someone in the suburbs or a rural area .

Here’s another crazy thing.

on the youtube link from my previous post - actually the next part of the 4 part video, you can hear the improvement in the amps from conditioned vs. Dedicated lines alone.... On the video.... Over my iPhone’s speaker! It’s actually crazy . I had to have a friend verify that he could hear it too. It’s seems impossible but the bass clarity was audible over a freakin’ phone. I would not have believed it if I hadn’t heard it myself.

I started ac conditioning with a monster government military surplus 300 pound transformer. It helped but was noisy. Since then I have had over twenty devices, some worked a little, some did nothing, some had liabilities, some were beautiful, some were regenerators, and the High Fidelity Waveguide power center which uses magnets to get the junk off the line.

It looks like a toaster oven, but it really works. 

I would still say the Elgar 3006B 200lbs Power Conditioner will outclass each and every single one mentioned on this thread. You really need to see these unit in person and how they can make your audio system elevate a few notch. Atma-Sphere music Systems www.atma-sphere.com is selling them and 1 is available for sale approx. 4000-4500 dollars I cant remember the price. I can tell you no other power conditioner in the high end audio market will come close to this one!!