Review: Dahlquist DQ-10 Speaker


Category: Speakers

Hello fellow audiophiles, I want to share with you my listening experiences of Jon Dahlquist's complete speaker system.

Many times you read reviews of the DQ-10 speakers and they most always comment on the lack of low-end and power hunger of the speakers. While true, this does not provide a true representation of what the complete Dahlquist speaker system is capable of. For those familiar with the Fulton Mod-J system, it would be like critiquing this system without its base module.

The complete Dahlquist speaker system consist of the famous DQ-10 main speakers; the DQ-1W subwoofer, the DQ-LP1 electronic crossover (and DQ-ST10 speaker stands for proper main speaker positioning).

The DQ-10 is a 5-way, open baffle, time-aligned speaker; the DQ-1W is a passive 13" subwoofer; and the DQ-LP1 is an electronic crossover that features a passive, distortion free high-pass section and a freq/gain adjustable low-pass section.

Several years after initial introduction, Dahlquist modified the main speaker design to mirror image the left and right speakers. This provided symmetry and widened the soundstage even further. If you are looking to buy a set, this is the version to get!

After 30 years of ownership the Dahlquists system still takes my breath away. The sound stage is extremely wide, I can close my eyes and picture the musicians playing, with each instrument precisely located across the front of my listening room. The accuracy and clarity is stunning, piano notes are clear and true; symbols ring with purity; acoustic guitar strings sound crisply plucked; and drum beats are powerful and tight.

The 5-way crossover network is the reason for the speaker's power hunger, it has several power resistors in it that really heat up. But what you get in return for this design is accuracy (purity of note) and clarity (distortion free) of sound because each speaker driver only has to work in a limited frequency range. This is especially true of the DQ-10 woofer driver which only has to work down to 60hz with the electronic crossover in the setup.

Because of its power hunger, it is extremely important to drive the Dahlquist system with ample power. I drive the main speakers with a Bryston 4B and the subwoofer with a Bryston 3B in mono mode, a total of 800 watts. What is important for any amplifier to achieve powerful and tight base is to not be current limited. This is the case, as with the Brystons, when the amplifier doubles its output power output when the speaker impedance is halved (i.e. 200 watts @ 8 ohms, 400 watts @ 4 ohms). Plus, the amplifiers must have a high dampening factor (i.e 500+) to ensure that the speaker driver has a single, fast excursion for a drum beat, without ringing.

With this setup, there is no one who would say the Dahlquist system lacks low-end. The frequency range is very wide, something like 25hz - 30khz. The adjustability of the DQ-LP1 crossover allows for completely seemless integration of the subwoofer into the mains. You cannot tell that the low base notes come from a seperate speaker box from the mains!

Given today's market prices, you can acquire a nice set of DQ-10s for $500, a DQ-1W for $200, and a DQ-LP1 for $300 = $1000 for the complete system. I venture to say that you cannot buy another full range speaker system for this price that will beat the Dahlquist system. You would have to spend multiples of that price to try to come close.

I certainly recommend them!

Associated gear
Click to view my Virtual System
jjh92
If any of you were to invest in a pair today would you go after the 10's or the 20(i)'s or 30(i)'s?

Review: Dahlquist DQ-10 Speaker
If any of you were to invest in a pair today would you go after the 10's or the 20(i)'s or 30(i)'s?
Yes. :-)
I had this system, too, many years ago only driven by 150w monoblocks. Swapped it for some electrostats and so forth and on. Years later, on display at a dealer, I saw a used pair with the metal cross work removed from the screens, a ribbon tweeter replacing the piezo and 3/4" dome, and the factory mod of the capacitors in the crossover in perfect condition for $250 for the pair. Looking back, I regret not buying those.
Does anyone know how the DQ-28's compare to the DQ-10, or even the 20i or 30i for that matter? I saw a pair on eBay and was quite curious about them.
Very right on review! Nice too see such interest in Dalquist in 2008. I have been using the DQ-20's for 20+ years, org. owner. Also power hungry. Used a Bryston 4B. Now VTL 225 Monoblocks. I still use a 15" Janus Sub-woofer powered with it's own 100 W amp/crossover, even though
the DQ-20's are more full range,improvement in the bass with a 10" woofer vs. DQ-10's. Love the stlye of the DQ-10's on the stands..
Too bad Jon cracked up in his Vette.
It's important to see if the woofers need to be re-coned.
When I had mine done, I couldn't believe what I was missing.