Review: Behringer DEQ2496 Equalizer


Category: Preamps

I mostly listen to classical music, but occasionally everything except rock pop and rap.

I am a sucker for spatial sense, and an effortless sound during loud passages. Note the elaborate subwoofer system and many watts of amplifier power.

Intermodulation distortion drives me nuts. Unfortunately this is often from mics used for vocalists, and can't be eliminated on playback.

I have just installed this unit, and it replaces nothing.
When set flat, or with its BYPASS mode engaged, I can detect no change in sonics. Its purpose is room equalization, and its effect will be whatever the benefits of room equalization are.

I did not go shopping for an equalizer: I have three channels of pure analog parametric equalization capability. What I wanted was a RTA, and this is one of few available other than Pro units costing several grand.
It costs only $340, and the associated mic and cable will set you back another $70 or so. It was my intention to bypass this unit once I determined the appropriate settings for the analog equalizers, but I now think that this is probably unnecessary, but it remains an option for digiphobics. This Behringer model uses 24bit 96KHz AD/DA converters, and I think some Floating Point processors for the DSP job. Very impressive. (An older model is being sold off cheap: it has less resolution). The unit has many capabilities beyond the EQ and RTA functions, but it would be worth the money for the RTA alone. You can download the owner's manual from the website. It looks complicated, but once you have the unit and play around with the controls is it all very easy. It is ruggedly built, (as prosound equipment must be) with well laid out controls, and, IMHO, an attractive addition to the equipment rack.

I auditioned the unit in the 2-channel bypass mode of the prepro.

This is a very nice toy, and cheap enough to gain easy spousal approval.

Associated gear
Denon 2900 with Underwood mod
Rotel 1066 PrePro
Ashley electronic crossover
3 CarverPro ZR1600 power amps biamped for front speakers
3 Magneplanar MG1.6
3 multidriver custom subwoofer systems


Similar products
N/A
eldartford
Thanks for this thread.
I live in Paris and will buy an DEQ 2496 to-morrow to equalize my sub+2mains for hi-fi system (which is a part of a 5+1 system with an onkyo SR875). I will install the 2496 between the digital output of my CD-audio and digital input of the Onkyo. I will compensate some bumps (25hz and 45hz) due to the room. All the precious information I just read in this thread confirm the best advice I collected.
I would be pleased to exchange experience.
The control interface of the DEQ2496 takes the cake for being the worst I've ever used. It works, but it's not intuitive. Be prepared to go through the instruction manual not once, not twice, not three times, but many many times. It's part of the reason why I'm pulling it out of my system.
Maybe you've gone through it too many times! :) Seriously there are many features in the unit which make the interface a bit complex, but once you spend a little time to understand it, it is really a non issue. For what you are getting and the low cost of the unit, I think it is very worth it to learn.
Mingles...Just because the thing is capable of so many different functions (it won't prepare your tax return) you don't need to do them all. Some which are valuable for a live performance setup have no application to home audio.
My units (I have three for a multichannel system) were set up once (actually several times) and once set I never need to touch them.

I agree that the instruction manual is complex, but that just reflects the unit itself. I have found that once I get the hang of it operation is quite straightforward.
Can this thing be remote controlled by a midi device? The literature seems to suggest it can.