Rather than repeating what Atmasphere said above, I'll just add Ditto!
The Tri-Planar is a wonderful sounding arm and a piece of cake to set up and adjust.
The Tri-Planar is a wonderful sounding arm and a piece of cake to set up and adjust.
tonearms with VTA-towers for true "VTAF"
Hi All,
I think the time has come to look at some more 'advanced' tone-arms that sport VTA towers. ('Old skool' is getting us not much further with this, or?))
During a lot of other, related postings it seems a good subject, I think.
Our experts, all might agree, that:
1) If you want to push the envelope for BEST possible replay, constant VTA 'adaptation' is an unavoidable matter. (nobody said madness :-)
2) I understand this means a TOP cart, inevitably with a 'most modern' type Fine-Line contact stylus, forget elliptical or can one even mention the word, spherical?
Add some TOP cantilever materials like:
- Beryllium (hard to get, as it is a very tricky material to work with i.e. very poisonous in powder form),
- Boron (which mostly has replaced the former),
- Titanium?? (was used by some of the better AT carts),
- Ruby, well some like it I hear,
- Sapphire?? (some one liked that better then Ruby, but VERY little seems about),
- Diamond (see e.g. the DV odd-ball 17D3), etc.
This should make for some VERY detailed and revealing reproduction (even in an MM cart), add to this the most revealing ingredients of a TOP LO-MC.
The end result is, that you can now here some marvellous detail (carved-outness of images, stage-depth -width, and on), B U T ONLY if your VTA is at its VERY closest to what the record was cut to! (Else you find your cart, record, arm, phono-pre, .... system sux :-)
More interesting yet, even the same vinyl brands have not always used the same cutting angles (over time). Anything from just under 20deg. to about 25deg. is what we find!
Next, these high res. styli also have each one their own preferred SRA / VTA angles, i.e. the stylus line-ridge related to the cantilever is a variable too.
Add this all up and you have a problem, particularly if you care for truly top play-back.
If you have a "VTA tower" it only seem to take 15sec. to change to the correct, previously found VTA, you do need to be organised though. If you want some know-how, Doug can tell, see also the discussion under:
"VTA setting for 'parabolic' and 'elliptical' styli"
http://forum.audiogon.com/cgi-bin/fr.pl?eanlg&1244713018
There we have mentioned 3 current contenders, I quote: "Graham, VPI, TriPlanar plus a few very costly linear trackers..."
WHAT ABOUT THE: Kuzma 4Point?!
If I wouldn't like e.g.:
- multiple added connections (Graham, 7 in total?)
- wobbly Unipivots (VPI)
- too many fiddly pieces to make up the arm (TriPlanar)
- air bearings, or worse yet 'electronic' arm-feed
If I'd have an issue with these, I've no working solution to the VTAF I'd be looking for.
What say you?
Greetings,
Axel
I think the time has come to look at some more 'advanced' tone-arms that sport VTA towers. ('Old skool' is getting us not much further with this, or?))
During a lot of other, related postings it seems a good subject, I think.
Our experts, all might agree, that:
1) If you want to push the envelope for BEST possible replay, constant VTA 'adaptation' is an unavoidable matter. (nobody said madness :-)
2) I understand this means a TOP cart, inevitably with a 'most modern' type Fine-Line contact stylus, forget elliptical or can one even mention the word, spherical?
Add some TOP cantilever materials like:
- Beryllium (hard to get, as it is a very tricky material to work with i.e. very poisonous in powder form),
- Boron (which mostly has replaced the former),
- Titanium?? (was used by some of the better AT carts),
- Ruby, well some like it I hear,
- Sapphire?? (some one liked that better then Ruby, but VERY little seems about),
- Diamond (see e.g. the DV odd-ball 17D3), etc.
This should make for some VERY detailed and revealing reproduction (even in an MM cart), add to this the most revealing ingredients of a TOP LO-MC.
The end result is, that you can now here some marvellous detail (carved-outness of images, stage-depth -width, and on), B U T ONLY if your VTA is at its VERY closest to what the record was cut to! (Else you find your cart, record, arm, phono-pre, .... system sux :-)
More interesting yet, even the same vinyl brands have not always used the same cutting angles (over time). Anything from just under 20deg. to about 25deg. is what we find!
Next, these high res. styli also have each one their own preferred SRA / VTA angles, i.e. the stylus line-ridge related to the cantilever is a variable too.
Add this all up and you have a problem, particularly if you care for truly top play-back.
If you have a "VTA tower" it only seem to take 15sec. to change to the correct, previously found VTA, you do need to be organised though. If you want some know-how, Doug can tell, see also the discussion under:
"VTA setting for 'parabolic' and 'elliptical' styli"
http://forum.audiogon.com/cgi-bin/fr.pl?eanlg&1244713018
There we have mentioned 3 current contenders, I quote: "Graham, VPI, TriPlanar plus a few very costly linear trackers..."
WHAT ABOUT THE: Kuzma 4Point?!
If I wouldn't like e.g.:
- multiple added connections (Graham, 7 in total?)
- wobbly Unipivots (VPI)
- too many fiddly pieces to make up the arm (TriPlanar)
- air bearings, or worse yet 'electronic' arm-feed
If I'd have an issue with these, I've no working solution to the VTAF I'd be looking for.
What say you?
Greetings,
Axel
- ...
- 44 posts total
- 44 posts total