Installation of B&W 683 into a wall cubby


Have set of 683s with Pioneer elite sc07. Moving to new house and building custom entertainment cabinet. Was told I could put a set of 683's into a wall with 1 1/2" space left on both sides and on top, with 6" rear clearance. Looking for feedback on whether or not this will detract from their performance.

Thanks.
mishman
Just make sure that they are supported well, that the base isn't flimsy. And being in a "cubby" may make them more boomy, so if you still have the foam inserts that go into the ports, you might want to experiment with those for the best sound (especially if you have a separate subwoofer). Other than that, just make sure that the front of the speaker is as close as possible to the front plane of the cubby.
If you're building the cabinet, or having it custom built, consider allowing a little more room on the sides to slip acoustic foam or panel inside the cubby.
There are some great in-wall speakers out there. Could save you some expensive cabinet work and the worry of how they will sound. Most speakers prefer to breath, they sound best out in the room somewhat. At best they are going to sound different.