Mordaunt Short speakers . Tri-wire vs Single wire

use any of the binding posts for single wire. tri or bi wire has its fans, but a good wire and solid connection is fine.

I have the Mordaunt-Short Performance 6 speakers which are also tri-wirable. I've got them bi-wired currently but replaced the stock copper jumpers with a wire cable matching the speaker cable. Transparency seemed to improve with this change - so might be worth trying before you go to bi or tri-wire. Any speaker post is fine for the amp to speaker cable run.

Thank you both for your help.

On the Performance 6 at least, M-S specify in the manual that single-wiring should be connected to the bottom set of binding posts out of the three, i.e., the woofers. Why they recommend this I don't know for sure. You could make the argument that the woofers demand the lion's share of the current draw and therefore should have the most direct, lowest-resistance connection. On the other hand, some folks advocate (in general) connecting to the tweeter posts, presumably on the grounds that this will offer greater sonic purity where it is most readily discernable. Whether any of this is actually reflective of reality I can't say, but it seems to me that the obvious thing to do if you're wondering would be to experiment with all three positions and see if you can hear any deciding differences.