Have you used a frequency/tone CD w/SPL meter ...


to measure your 2 channel audio system at your listening position? What findings did and didn't surprise you? Given their small cost relative to most system costs, should these be in wider use despite their limitations?
jb0194
For someone trying to get a handle on the whats and whys on their rooms bass response I think they are invaluable. Especially so when initially setting up speakers. FWIW, I suspect very few who are really serious about set up are without one.

What surprised me most when I first starting using one was the extent of bass abnormalities that could be cured by simply moving the speakers or listening chair a little bit. I had heard folks talk about small movments making big differences but I thought they were FOS.
Huge changes in bass response depending on small changes in seating position. Less than 12" forward or back affected bass by as much 10db.
Everyone should try it if possible. Cheers,
Spencer
Ditto to Newbee & Sbank's responses. The small differences in listening position will be particularly true in small to mid sized rooms, especially ones where the dimensions reinforce the same frequencies (a cube is the extreme example where the opposing surfaces are equally spaced). The meter was also instructive to me since, for example, my initial views of a flat bass response were really not correct.
I totally agree with everyone's sentiments. I use Room EQ Wizard to generate my test tones and graph the response from my Rat Shack analog spl. I guess if I was really serious I would get a better spl.
Yes, some measurement of frequency response is valuable, but, there is simply no comparison between using a SPL meter with a test disc vs using a spectrum analyser (like a Behringer DEQ2496). The spectrum analyser gives you an immediate indication of any changes (like speaker or listener position). It gives you a much clearer idea of the whole spectrum.