CD direct to Amp/Current TAS issue ?

...A few cents more. Many of the respondents have made valid points concerning the use of a CD Player to direct drive a power amp, but a few points of clarification are in order. None of the Wadia units, cd players or processors, use analog volume control. All Wadia products use pure digital control. The "Throwing away of bits" issue is relative to units with fixed variable output. By this I mean that at maximum output, the unit will pass X volts, period. Wadia uses adjustable output via internal dip switches which can be configured to give the optimum output at maximum resolution depending upon the rest of the components in one's system, without throwing away bits at low volume levels. I know of no other line of products which are able to be adjusted to match maximum output to the other gear in the system to allow max resolution at customary listening levels. Units such as the Levinson #39, Theta Miles, CAL CL-15 and so on ,use analog volume controls for adjustable gain. IMHO, any Pre-Amp and extra interconnect in the signal path will degrade the sound of the signal by the time it reaches the speakers drivers and ultimately, your ears. There is no way that electrical signals can be passed through so much additional wire, circuitry, interconnect cables and the like ,without the basic character of the signal changing, however slight this may be. Wadia products may be configured with multiple digital inputs and outputs, and can be used in conjunction with a high quality A/D converter for the importation of other analog sources for the person who wishes to use one of their units as a digital source, switching device and volume control in lieu of a conventional pre-amp. If you like networked cables, tubes, application specific cables, super power cords or whatever, realize that they all will color the sound, it will not be accurate, but I am not saying that accurate neutrality is to everyone's taste...we like what we like, that's the first rule of enjoying this hobby. If it sounds good to you, then it is.

The TAS reviewer probably did not mention that what he was attempting to do was imitate a Passive Attenuator setup in the system. You can go direct from any component with a voltage output to your amps through passive attentuators. Check the EVS website. $225 a pair. The component does not require a volume control, ie DAC's. (The PA's are the volume control). The purest signal, the best sound you will achieve is by eliminating as many stages, switches, and wires, between the source and the amps as possible.

I am using mine this way, and there a zero compromises with the Resolution Audio CD50, only advantages. COMPARISONS WITH PLAYERS LIKE THIS SHOULD NOT BE MADE WITH STANDARD CD PLAYERS AND PASSIVE ATTENUATOR PREAMPS, because the tow have nothing to do with each other. The CD50's components are without compromise (discrete bi-polar output devices running in class A, with the highest quality microprocessor controlled volume, the same as used in the very best linestages). It is designed to drive a power amp directly, and it is the best digital source for CD's under $10,000 in existence, at least of the ones that do not upsample.............I can see why guys would want a tube linestage to help a lesser CD player along (and blur some of its grain), but if you got one of these, you certainly wouldn't be worried about that. Good luck.

gee carl,next time leave something for me to say!!! resaudio cd-50 without a doubt,it's just too good of a value performance to ignore,alfred