1. Home
  2. tech-talk
  3. 1001889380

Here's How I Make My Equipment Racks

In response to a previous thread, here's how I make my
equipment racks:
List of equipment: 3/4" thick MDF cut to desired shelf
size
(4) 3/4" diameter 6' threaded steel rods
3/4" nuts and washers (8 per shelf)
Drill a 3/4" hole in the corner of each shelf in exactly the
same place. I do this by scribing a line with a square 1 1/2" inch in and using a nail set to punch a hole where the lines intersect. A drill press works great to drill the holes so they are all straight and true. Now that you have
a hole drilled in each corner of each shelf, simply screw
the whole thing together, adjusting each shelf to fit your
gear. Use a square to make sure your first shelf is straight, and measure each one likewise. If you do this
correctly, your rack will sit straight and level. If you
need to level it further, buy (4) 3/4 rod connectors, which
are about 3" high, and screw these into the bottom of the
rod and use them to level it. I paint the steel rod using
Krylon Industrial enamel (flat black looks best), and paint
the shelves to match your decor. This makes a very solid,
heavy audio rack. Total cost is about $40 for the steel
rod, $15 for the nuts and washers (about $1.00 a pound)
$20 for the MDF, and $5.00 worth of paint for a total under
$100. I've made several racks this way and have used the
same method to make CD racks.
Dave
dave43
sean
6,231 posts
 
Playing "devil's advocate" here, huh Ken : )

That's okay though, as if it weren't for folks like you, many of us out here would not have tried some of the other racks / shelves / devices that are available. On top of that, we might not have ever thought of coming up with a "better mouse trap" ourselves. Sean
>
caterham1700
271 posts
 
Hi Sean,

Devil's advocate? Nah, party pooper is more like it;0)

I regularly read at various fora,similar well meaning recommendations and instructions for the Flexy and its variants and sometimes I just can't contain myself.

These things aren't truely awful,it's just that most of the folks posting on their successess in building them have never heard what a really good support can do.
The better supports should easily up the performance of a system a full level in musical accomplishment,the best of them much more.
The Flexy's & Salamander's of the world(ie-threaded rod racks) are just tall spacers to keep components off the floor and each other.
They aren't actively bad.They just don't do anything worthwhile.
I responded in this example because of the remark that the poster (thoughtfully) mentions that this DIY project cost less than $100.
That amounts to a sizeable portion of money that could be better spent toward a dedicated support(new or used) that will actually improve the performance of one's system and bring the listener another step closer to the performance.

Best,
Ken
GreaterRanges/Neuance
sean
6,231 posts
 
I do agree with your basic statements. I too have found most threaded rod racks to be "convenient" rather than a sonic benefit. I've also found that "heavy" shelves are typically not to my liking.

With that in mind and while i've got your attention, can i ask you some questions regarding a rack project i'm going to try ??? I'd be curious as to your take on the situation. Sean
>
ohlala
1,277 posts
 
The Flexy is good. I had to build one because i did not have enough money to get beyond the Salamander, Plateau, Quadraspire, etc. brands, which are no better. And you have to put your equipment on something. One hundred out of a $700 could be considred substantial, but I do not have $600.
Keep your head up, and your wallet close, Dave...Ken's after your $100. And maybe try three rods instead of four, sometime.
caterham1700
271 posts
 
Fire away,Sean. Feel free to e mail me or post here.I'll help in any way I can.
Best,
Ken
More to discover