Pass Aleph 30 and 60


Anybody has experience with this amplifiers ?
I´m loocking for Single Ended Class A amplifier for my Tannoy Edinbugh HE loudspeakers (94db sens.)
The Aleph 30 and 60 are better that the old 2,3,4 or 5 series ?
Please let me know your opinions.
Thanks
elduende14
David,

You couldn't be furthur from the truth. Volksamp was a company set up by Nelson Pass. The reason Nelson started to remarket the Aleph 30 under the Pass Labs name and not the Volksamp name was that they were not selling as well without the Pass Labs name. They were manufactured at Pass Labs in Forrest Hills, California. Look at page 12 of the Aleph 30 service manual. Guess what other company is in Forrest Hills, California? Pass Labs, thats who. You can even see the pass Labs logo on the first page of the service manual. You can download the service manuals for both the Aleph 3 and Aleph30 and look at the schematics and find the amps are identical except for the balanced input connector. Here is the Aleph Page at PassLabs.com: http://www.passlabs.com/aleph.htm if you don't believe me. I have no idea why you concocted this whacky story but it is just not the truth.
Elduende14,

By the way Nelson Pass has set up another company called First Watt. He is marketing a number of lower power class A amplifiers designed for high sensitivity speakers. One of the amps the "Aleph X" is supposed to sound remarkable with high sensitivity speakers. Because your Tannoys are 94dB this is a real option. The scuttlebutt is that these amps will be very reasonably priced. Nelson has stated the amps should be ready soon. The web site is http://www.forstwatt.com. Stay tuned......
Liguy-I didnt 'make up' this.
I remember reading about all that I wrote before the first Volksamp hit the shores.
There is a difference in design also besides the balanced input.
The 30 has a tad more power than the real aleph-3

David,

Wrong again. The Aleph 3 has a little more power at 4 ohms. There has been some component changes in the Aleph30 but the design is the same. Have a look at the schematics. There are no differences in topology. This is from the Aleph 30 manual:

Gain 20 dB balanced, 26 dB single ended
Freq. Response - 0.5 dB @ 2 Hz, -1.5 dB @ 100 KHz
Power Output 30 watts/ch @ 8 ohms, 40 watts @ 4 ohms
Maximum Output 25 volts, 5 amps
Distortion (1KHz) 0.2% @ 30 watts, 8 ohms
Input Impedance 47 Kohm single-ended, 52 Kohm differential
Damping factor 100
Crosstalk > -80 dB 20-20 KHz
Balanced Input Rejection -50 dB typical CMRR
Output Noise < 500 uV unweighted
Random noise floor 5 uV typical
DC offset < 100 mv
Power Consumption 200 watts
Temperature 25 degrees C. above ambient
Dimensions 17 " W x 15.5" D x 5.5" H
Shipping Weight 45 lb.
VOLKSAMP
Pass Labs
Po Box 219
Foresthill CA 95631
tel (530) 367 4935
fax (530) 367 4984
www.volksamp.com
www.passlabs.com

This is from the Aleph 3:

SPECIFICATIONS
Gain 20 dB
Freq. Response - 0.5 dB at 2 Hz, 100 KHz
Power Output 30 watts/ch 8 ohms
60 watts/ch 4 ohms
60 watts/ch 2 ohms
Maximum Output 23 volts, 8 amps
Distortion (1KHz) 0.2% @ 30 watts, 8 ohms
1% @ 60 watts, 4 ohms
1% @ 60 watts, 2 ohms
Input Impedance 23 Kohm
Damping factor 100
Crosstalk > -80 dB 20-20 KHz
Output Noise 500 uV unweighted
DC offset < 100 mv
Power Consumption 250 watts
Temperature 25 degrees C. above ambient
Dimensions 12 " W x 12" D x 6" H
Shipping Weight 38 lb.
PASS
Pass Laboratories
PO Box 219
24449 Foresthil Rd.
Foresthill CA 95631
tel (916) 367 3690
fax (916) 367 2193

I have built enough Alephs, so I know this cold.