Which tubes? My amp can except El34, 6L6, KT88, an


As stated my amp can except El34, 6L6, KT88, and 6550's. I would like to know which would give me the best sound for my system? I am running quiksilver 135 monoblocks(which require 6 of any of the previous mentioned output tubes in each amp) into Vandersteen 5's which have a built in sub and 400 watt amp for low end connected with audioquest Kilimanjaro type speaker cable. I am not familiar with the diffrent type of tubes and sonic characteristics so all help is appreciated.

ras10
Creeper, the Svetlana 6550c is what I use in my amp.It was voiced with those tubes though so I leave well enough alone. I hear that in the right amp the Electro Harmonix 6550 is very good too. But it has to be the right amp! A friend tried them and a first it was great, as they burned in though the sound got real thin and nasty over the course of a few weeks. He has an ARC VT60. He asked ARC about it and they told him that they had the same results with the Electro's in the VT100. Seems to be a lot of variation in different brands, let alone different types of tubes. Makes a recomendation for someone else pretty complicated.
Maxgain, I have the Vandys low end set a 1 with the V12i. This maybe more of a room issue than an amplifier issue. I also used a Rives setup cd and a Radio Shack sound pressure meter to adjust the multiple subs settings. I like the EL34 tubes and retubed with NOS with excellent results. Good luck
I'd also love to hear Rec's Vandys.

Didn't know about V5's crossover pulling it's signal off the output of the main amp, I thought it was line level from the preamp.

I'm running KT-90 type 3 in my SF Power One SE, and they're just starting to settle down and sound as Creeper describes above.

Question for the Vandy guys: I saw a picture from a recent
audio show with a speaker Vandersteen was calling the Signature One, which was the top section of the V5s, but
there's no mention of it on their website. Is it a real
product?
Creeper, if you wan't to do some reading about the way the powered woofer on the 5 is set up, the review in "The Absolute Sound" explains it quite well. It can be found at the Vandersteen web site. I realize after some reading myself that the Vandersteen 5 comes with the model 5, high pass filter, that goes between your amp and pre-amp.I understand that these are very transparent unlike the crappy little WX-2 supplied as a temporary filter for the 2Wq.
It is my understanding that Vandersteen is offering a upgrade to the Model Fives, there is a change in the subwoofer amplifier, crossover and the midrange driver. The upgrade is around 3800.00 depending on how recent your Fives are. This came from my local dealer after he talked to Richard Vandersteen. There may be other changes as well, I only had the chance to talk with him briefly and probably didn't get all the information.