Thanks for your responses. I did configure the 2 belts correctly, and I still can't get above 55.85 hz. With the tri-pulley arrangement, my SDS was set about 58.7 or so.
VPI SDS speed question
I have a VPI TNT mk.III set-up w/ flywheel. I am using 2 belts, bypassing the hubs as suggested by others. Regardless of how far away I place the flywheel from the motor, I need to reduce the voltage on the SDS to about 55.7 hz. Should I be concerned that the motor is way off? I assume the motor should run pretty close to the 60hz when aligned via strobe disc. Anyone else had this experience?
Thanks,
Jeff
Thanks,
Jeff